FAQ

General questions - IP, Addressing, Multicast etc

• Are there any known security vulnerabilities with Barix devices

• So, I have purchased an Instreamer and an Exstreamer. And now what?

• How do the devices get their IP address ?

• What if my routers don't have a fix IP address from the ISP (Internet service provider) ?

• How do i connect a Barix device to HSPDA, UMTS, CDMA, EVDO, wireless networks ? Please see Connecting to 3G Networks

• Ho do I do a web update of a device ? Please see FW Update

• How do I set the device back to factory defaults ?

• How do I perform a "Serial Rescue" of the device if it becomes unreachable ? Please see FW Update

• How do I get the "status page" of any device ?

• What if the device is still unreachable after a serial rescue ?

• The device already has a password either I don't remember or I don't know, how do I erase it ?

• What is SonicIP?

• Redundancy - how do i use Barix devices for a high availabilty application

• SonicIP Voice - can I change this and record my own ? Yes, to do so follow this SonicIP Howto

• What is AutoIP, IPzator, etc.and how do I use them?

• Do the Barix products support Multicast and IGMP ?

• Do the Barix products support IPv6 ?

• I want to set up a local network with more than 250 devices, what do i have to do ?

• I want to do a broadcast over different subnets, is that possible ?

• Which port/s do your devices commonly use ?

• What does RTP stand for ?

• AND what does BRTP stand for ?

• How much latency should I expect in an Instreamer/Exstreamer setup using BTRP ?

• How do emergency messages work ?

Audio FAQ

Questions related to audio formats in general

• What is the difference in using PCM MSB and PCM LSB? (e.g. in the STL application)
• Bit-reservoir issues

Instreamer/ Encoding related questions

• How are measured Input Peak Levels

• Can the Instreamer also encode WMA ?

• Can the Instreamer also encode AAC+ ?

• What kind of streams does the Instreamer produce ?

• May I configure the stream EXACTLY at 64 kps (or some other value) on Instreamer 100 ?

• How much bandwidth do I need to stream audio ?

• How many destinations can I stream to ?

• I have set up multiple shoutcast destinations on my Instreamer. Can I use different passwords for different streams?

• How do I set the Instreamer to feed streaming audio to a stream hosting company ?

• I want to play the stream of an Instreamer with Windows Media Player, but it does not work

• Is there a way to connect to the Barix Instreamer directly? We would like to get the audio from the device with as little lag as possible.

• How do I configure a Instreamer-Exstreamer audio connection within the same LAN ? Please read the Instreamer-Exstreamer How To guide.

• How do I configure a Instreamer-Exstreamer audio connection over the Internet (known as STL connection)? Please read the STL connection over Internet guide.

• When using the Instreamer 100 to encode / feed a Shoutcast Server, how do I insert Artist / Title / Station-name text ? Please read how to send metadata

• Can i distribute IP Audio over a SCA channel with an Instreamer ?

Exstreamer related questions

• How to use the Exstreamer 1000 as a PCM STL ?

• How do I play an AAC stream? What version of AAC do you support?

• How do I know what the LED blinking means ? Please find that information in the "Exstreamer Technical Manual". (Faster Green and Red LED)

• Can I download audio files from a remote server to be played ?

• How do I configure the Exstreamer 100 to play files from a flash drive attached to the USB port when the Internet goes down ?

• How do I stream from a PC to an Exstreamer ?

• How can I monitor an Exstreamer ?

• How to listen Barix Radio with Exstreamer ?

• What is the capacity of contact of the relay in an Exstreamer-1000 ? 24V - 0,5A

• They have to feed the input of relay contacts?. How much ?

• How can I transmit IO information (beside the audio) over STL Link ?

Annuncicom related questions

• Can I build an intercom system with Annuncicom?

• What are the ratings for the relay on the Annuncicom ? The ratings for the relay are: max 50V/1A

• Does the Annuncicom feature SIP functionality ?

• Is an Annuncicom 100 with standard firmware able to receive audio using RTP protocol ?

• How do I use the Annuncicom with Sureview Immix ?

• What is the typical power consumption of Annuncicom 100 ?

IPAM related questions

• What is the difference between IPAM 200 and IPAM 300?

Control FAQ

X8 related questions

• How do i update an X8 with the latest firmware ? You need a Barionet to do this. Please read a detailed howto X8-Update

Barionet related questions

• How do i read an I/O register using SNMP ?
• What is the typical Barionet Power Consumption ?

Back to Main Page#Support - FAQ & Troubleshooting