Barix TS

Revision as of 17:03, 19 December 2008 by Jrietschel (talk | contribs) (New page: == Barix TS == The Barix TS is a wide range, high reliability temperature sensor with Dallas Onewire interface. It is essentially a DS1820 chip molded into a small housing with attached i...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Barix TS

The Barix TS is a wide range, high reliability temperature sensor with Dallas Onewire interface. It is essentially a DS1820 chip molded into a small housing with attached interface cable.

Until about 2007, the Barix TS was shipped with the interface cable length being approx. 30cm, and the two inner wires were color coded "green" (ground) and "green with white strip" (data). That was changed in 2007, and now the cable length is approx. 1m (3ft), and there are 2 versions with different cable colors: black and red - this is an intermediate version, they have a small label attached to the wires. The red wire is ground, the black wire is data. black and yellow - this is the current shipping version (as of Dec 2008), the black wire is ground and the yellow wire is data.