Difference between revisions of "Barionet 1xxx"
(Replacing page with '==Configuring the Barix Barionet 1000 as an access point== ===HowTo=== 1) First, we need to Configure the LAN IP 2) Then, we need to delete the WLAN IP. You should get a simila...') |
|||
| Line 1: | Line 1: | ||
==Configuring the Barix Barionet 1000 as an access point== | ==Configuring the Barix Barionet 1000 as an access point== | ||
===HowTo=== | ===HowTo=== | ||
1) First, we need to Configure the LAN IP | 1) First, we need to Configure the LAN IP<br> | ||
2) Then, we need to delete the WLAN IP. You should get a similar image after deletion of the WLAN | 2) Then, we need to delete the WLAN IP. You should get a similar image after deletion of the WLAN<br> | ||
3) Associate this to the LAN | 3) Associate this to the LAN<br> | ||
4) Make sure to check the LAN field | 4) Make sure to check the LAN field<br> | ||
5) After doing '''Save and Apply''' | 5) After doing '''Save and Apply'''<br> | ||
Back to [[FAQ]] | Back to [[FAQ]] | ||
Revision as of 14:01, 11 July 2017
Configuring the Barix Barionet 1000 as an access point
HowTo
1) First, we need to Configure the LAN IP
2) Then, we need to delete the WLAN IP. You should get a similar image after deletion of the WLAN
3) Associate this to the LAN
4) Make sure to check the LAN field
5) After doing Save and Apply
Back to FAQ
