Difference between revisions of "FAQ"

 
(39 intermediate revisions by 9 users not shown)
Line 1: Line 1:
== General questions - IP, Addressing, Multicast etc ==
== General questions - IP, Addressing, Multicast etc ==


* '''[[Are there any known security vulnerabilities with Barix devices]]'''


* '''[[So, I have purchased an Instreamer and an Exstreamer. And now what?]]'''
* '''[[So, I have purchased an Instreamer and an Exstreamer. And now what?]]'''
Line 23: Line 24:


* '''[[What is SonicIP?]]'''
* '''[[What is SonicIP?]]'''
* '''[[Redundancy]] - how do i use Barix devices for a high availabilty application'''
*'''SonicIP Voice - can I change this and record my own ?''' Yes, to do so follow this [[SonicIP Howto]]


* '''[[What is AutoIP, IPzator, etc.and how do I use them?]]'''
* '''[[What is AutoIP, IPzator, etc.and how do I use them?]]'''
Line 48: Line 54:
=== Questions related to audio formats in general ===
=== Questions related to audio formats in general ===
* '''[[What is the difference in using PCM MSB and PCM LSB?]]''' (e.g. in the STL application)
* '''[[What is the difference in using PCM MSB and PCM LSB?]]''' (e.g. in the STL application)
* '''[[Bit-reservoir issues]]'''


=== Instreamer/ Encoding related questions ===
=== Instreamer/ Encoding related questions ===
* '''[[How are measured Input Peak Levels]]'''


* '''[[Can the Instreamer also encode WMA ?]]'''
* '''[[Can the Instreamer also encode WMA ?]]'''


* '''[[Can the Instreamer also encode AACplus ?]]'''
* '''[[Can the Instreamer also encode AAC+ ?]]'''
 
* '''[[Do you have a product to encode AACplus (or a plan to do this ?)]]'''


* '''[[What kind of streams does the Instreamer produce ?]]'''
* '''[[What kind of streams does the Instreamer produce ?]]'''
Line 73: Line 80:
* '''[[Is there a way to connect to the Barix Instreamer directly? We would like to get the audio from the device with as little lag as possible.]]'''
* '''[[Is there a way to connect to the Barix Instreamer directly? We would like to get the audio from the device with as little lag as possible.]]'''


* '''How do I configure a Instreamer-Exstreamer audio connection within the same LAN ?''' Please download the [[Instreamer-Exstreamer How To]] PDF guide from the Downloads section of Barix site.
* '''How do I configure a Instreamer-Exstreamer audio connection within the same LAN ?''' Please read the [[Instreamer-Exstreamer How To]] guide.


* '''How do I configure a Instreamer-Exstreamer audio connection over the Internet (known as STL connection)?''' Please download the [[STL connection over Internet]] PDF guide from the Downloads section of Barix site.
* '''How do I configure a Instreamer-Exstreamer audio connection over the Internet (known as STL connection)?''' Please read the [[STL connection over Internet]] guide.


* '''When using the Instreamer 100 to encode / feed a Shoutcast Server, how do I insert Artist / Title / Station-name text ?''' Please read [[how to send metadata]]
* '''When using the Instreamer 100 to encode / feed a Shoutcast Server, how do I insert Artist / Title / Station-name text ?''' Please read [[how to send metadata]]
* '''[[Can i distribute IP Audio over a SCA channel with an Instreamer ?]]'''


=== Exstreamer related questions ===
=== Exstreamer related questions ===
Line 83: Line 92:
*'''[[How to use the Exstreamer 1000 as a PCM STL]] ?'''
*'''[[How to use the Exstreamer 1000 as a PCM STL]] ?'''


*'''How do I play an AAC stream? What version of AAC do you support?'''
*'''[[How do I play an AAC stream? What version of AAC do you support?]]'''
To play an AAC stream use an Exstreamer 110 labelled with "AAC+ capable" on the bottom. The software must be the Streaming Client 2.x (preloaded in the Exstreamer 110).


Both the [[wikipedia:Advanced Audio Coding|AAC (AAC LC)]] and [[wikipedia:AAC+|AAC+ (HE-AAC)]] are supported. In AAC+ both [[wikipedia:Spectral band replication|SBR]] (v1) and [[wikipedia:Parametric Stereo|PS]] (v2) are supported.
*'''How do I know what the LED blinking means ?''' Please find that information in the "Exstreamer Technical Manual". (Faster [[Green and Red LED]])


*'''How do I know what the LED blinking means ?'''
*'''[[Can I download audio files from a remote server to be played ?]]'''
You can find that information in the "Exstreamer Technical Manual". (Faster [[Green and Red LED]])


*'''Can I download audio files from a remote server to be played ?'''
*'''[[How do I configure the Exstreamer 100 to play files from a flash drive attached to the USB port when the Internet goes down ?]]'''
YES. There is an application called  '''"FTP/HTTP store and forward MP3 player"''' contained in the ABCL-Kit Software (you can download it from Barix website www.barix.com). Basically it downloads playlists and MP3 files from a configured FTP or HTTP server to the local USB drive and plays them according to the configured time schedule (definable in the playlist). Features background update of mp3 files and playlists.


*'''How do I configure the Exstreamer 100 to play files from a flash drive attached to the USB port when the Internet goes down ?'''
*'''[[How do I stream from a PC to an Exstreamer ?]]'''
You have to use the Streaming Client Software on the Exstreamer and check if "playlist.m3u" is set in the 3rd URL. Copy your mp3-files into the root directory of the usb-stick. After rebooting, the Exstreamer will find the attached usb-stick and play the music if there is no network available.


Note: There are some rules for the usb-stick. See [[USB_device_compatibility_list#Limitations]]
*'''[[How can I monitor an Exstreamer ?]]'''


*'''How do I stream from a PC to an Exstreamer ?'''
*'''[[How to listen Barix Radio with Exstreamer ?]]'''
There are several solutions possible:


a) zServer Software:
*'''[[What is the capacity of contact of the relay in an Exstreamer-1000 ? 24V - 0,5A]]'''
Please install the zServer software on your pc (download it from Barix website). Set the Exstreamer (with Standard SW) to factory defaults and it will find the zServer automatically.


b) MP3_RTP_Streamer Application:
*'''[http://wiki.barix.com/index.php5?title=Exstreamer_110_Power_Consumption_measurements What is the power consumption of Exstreamer 110?]'''
Please install this java-application on your pc. The application will create a rtp-stream and send it through your network.
*'''[[I have to feed the input to relay contacts? How much ? How can I transmit IO information (beside the audio) over STL Link ?]]'''


c) HTTP-Server:
=== Annuncicom related questions ===
Please install a http-server software like Apache or SimplyServer on your pc. Now you are able to pull the stream with the Exstreamer from the server. To get it to work please do the following:
** start your http server
** create a txt file with include the names of your playlists and name it playlists.txt
** the playlist.m3u file must include the complete path to the mp3-files (e.g. http://<ip-http-server>/music/example.mp3)
** at the Exstreamer (with the Standard SW) use Mode 2 "Webserver"
** at the Exstreamer's homepage you should see the content of the playlist.txt file


d) VAcard Application:
* '''[[Can I build an intercom system with Annuncicom?]]'''
Install the VAcard software on your Windows PC (download it from Barix website). This application will create a virtual soundcard and stream the audio to the Exstreamer.


*'''How can I monitor an Exstreamer ?'''
* '''What are the ratings for the relay on the Annuncicom ?''' The ratings for the relay are: max 50V/1A
For monitoring you can use the mtell-application. Please go to http://www.m-tell.de and click on the "create a new free demo project" link. In the mtell-settings you have to set the MAC address of the Exstreamer. Now you are able to sent the status of the device to the mtell-server. At the Exstreamer you have to set the MTEL URL to "http://www.m-tell.de" and the "MTELL Report Periode" to 5 seconds.


*'''What is the capacity of contact of the relay in an Exstreamer-1000 ?'''
* '''[[Does the Annuncicom feature SIP functionality ?]]'''
24V - 0,5A


=== Annuncicom related questions ===
* '''[[Is an Annuncicom 100 with standard firmware able to receive audio using RTP protocol ?]]'''
* '''Can I build an intercom system with Annuncicom?'''
Yes, use the PS16 as the central station. Follow this [[Barix Intercom System|howto]] to set up the system.


* '''What are the ratings for the relay on the Annuncicom ?'''
* '''[[How do I use the Annuncicom with Sureview Immix ?]]'''
The ratings for the relay are: max 50V/1A


* '''Does the Annuncicom feature SIP functionality ?'''
* '''[[How do I use the Annuncicom with Milestone XProtect ?]]'''
Yes it does. To use the SIP application it is necessary to download the ABCL Kit. ABCL (Audio Barix Control Language) is a free programmable language like basic. The ABCL Kit includes a SIP Client for the Annuncicom. You can download it from the Download section of Barix website (Within "Software Solutions" category)


* '''Is an Annuncicom 100 with standard firmware able to receive audio using RTP protocol ?'''
* '''[[What is the typical power consumption of Annuncicom 100 ?]]'''
Not with the standard firmware, but with the "Annuncicom Fullduplex" application contained in the ABCL kit.


=== IPAM related questions ===
=== IPAM related questions ===


* '''What is the difference between IPAM 200 and IPAM 300?'''
* '''[[What is the difference between IPAM 200 and IPAM 300?]]'''
** IPAM 300 is an "upgrade" drop in replacement of the IPAM 200
 
** one more connector (4 pins) for I2S (digital output)
** no other hardware changes
** slightly better audio quality
** newer version of the DSP, can now also handle AACplus v2 (needs to be licensed if needed) and Ogg Vorbis
** runs the same software
** same price


== Control FAQ ==
== Control FAQ ==


=== X8 related questions ===
=== X8 related questions ===
* '''How do i update an X8 with the latest firmware ?'''
* '''How do i update an X8 with the latest firmware ?''' You need a Barionet to do this. Please read a detailed howto [[X8-Update]]
You need a Barionet to do this. There is a special application for the Barionet which helps in doing this.
Here is a detailed howto page on this wiki describing this: [[X8-Update]]


=== Barionet related questions ===
=== Barionet related questions ===
* '''How do i read an I/O register using SNMP ?'''
* '''[[How do i read an I/O register using SNMP ?]]'''
All registers in the Barionet which hold I/O values can be read and written via SNMP. You can easily control the relays, for example, by using SNMP set requests on registers 1 and 2.
* '''[[How do i set an I/O register using SNMP ?]]'''
 
* '''[[What is the typical Barionet Power Consumption ?]]'''
The detailed register map is documented in the Barionet manual.
 
How do the registers map to Object ID's ?
 
This is defined in the Barionet MIB, which is included in the device (you can access it with the URL /barionet.mib on the device), and on the Barix website.
Here is, for example, the OID for register 201 (digital input 1):
 
1.3.6.1.4.1.17491.1.1.2.1.2.201.0
 
Note the .0 at the end - and the number before is the register.




Back to [[Main Page#Support - FAQ & Troubleshooting]]
Back to [[Main Page#Support - FAQ & Troubleshooting]]

Latest revision as of 13:43, 11 September 2013

General questions - IP, Addressing, Multicast etc

  • Ho do I do a web update of a device ? Please see FW Update
  • How do I perform a "Serial Rescue" of the device if it becomes unreachable ? Please see FW Update
  • Redundancy - how do i use Barix devices for a high availabilty application


  • SonicIP Voice - can I change this and record my own ? Yes, to do so follow this SonicIP Howto

Audio FAQ

Questions related to audio formats in general

Instreamer/ Encoding related questions

  • How do I configure a Instreamer-Exstreamer audio connection over the Internet (known as STL connection)? Please read the STL connection over Internet guide.
  • When using the Instreamer 100 to encode / feed a Shoutcast Server, how do I insert Artist / Title / Station-name text ? Please read how to send metadata

Exstreamer related questions

  • How do I know what the LED blinking means ? Please find that information in the "Exstreamer Technical Manual". (Faster Green and Red LED)

Annuncicom related questions

  • What are the ratings for the relay on the Annuncicom ? The ratings for the relay are: max 50V/1A

IPAM related questions


Control FAQ

X8 related questions

  • How do i update an X8 with the latest firmware ? You need a Barionet to do this. Please read a detailed howto X8-Update

Barionet related questions


Back to Main Page#Support - FAQ & Troubleshooting

Retrieved from "https://wiki.barix.com/index.php?title=FAQ&oldid=4536"