Difference between revisions of "What is the difference in using PCM MSB and PCM LSB?"
(New page: MSB and LSB are two different ways of sending 16-bit PCM samples over the network. The difference is in the byte order (most vs. least significant byte first). The setting must be compat...) |
|||
| Line 6: | Line 6: | ||
MSB is the network standard. LSB is usually generated by PC programs. | MSB is the network standard. LSB is usually generated by PC programs. | ||
Back to [[FAQ]] | Back to [['''[[FAQ#Audio_FAQ]]''']] | ||
Latest revision as of 18:39, 30 August 2011
MSB and LSB are two different ways of sending 16-bit PCM samples over the network. The difference is in the byte order (most vs. least significant byte first).
The setting must be compatible to the communicating partner. For a communication between two Barix devices (e.g. STL link) it does not matter what you choose, but configure both to the same value. If you are interfacing another equipment (e.g. a PC), your selection must be compatible to it.
MSB is the network standard. LSB is usually generated by PC programs.
Back to [[FAQ#Audio_FAQ]]
