Difference between revisions of "Failure Check List"

(New page: The Steps to analyze if the Barix device is dead. 1. If the device is not announcing the sonic IP, try by using the Discovery Tool (available on the Barix WEB site) [http://www.barix.com/...)
 
 
(4 intermediate revisions by one other user not shown)
Line 1: Line 1:
The Steps to analyze if the Barix device is dead.
Few steps to analyze if the Barix device is dead.


1. If the device is not announcing the sonic IP, try by using the Discovery Tool (available on the Barix WEB site)
# If the device is not announcing the Sonic IP, try by using the Discovery Tool (available on the Barix WEB site) [http://www.barix.com/index.php?id=174]
[http://www.barix.com/downloads/Software_tools/221/]


2. If you still cannot reach the device, then force Factory Default
# If you still cannot reach the device, then force Factory Default. Depending on the firmware on the Barix device you have a Tab "Defaults" on the WEB Interface or depending on the HW you can do that by long press (>10sec) of the Reset button.
Depending on the application you have a Tab "Default" on the WEB Interface or
depending on the HW you can do that by long press (>10sec) the Reset button.


3. If none of the previous action is successful you may need to do a Serial Resue.
# If none of the previous action is successful you may need to do a Serial Resue. see ''http://wiki.barix.com/index.php5?title=FW_Update''
see ''FW_Update''
 
# finally please contact your Barix distributor or Barix Support for help or a RMA
 
 
Back to [[Troubleshooting]]

Latest revision as of 11:42, 15 April 2013

Few steps to analyze if the Barix device is dead.

  1. If the device is not announcing the Sonic IP, try by using the Discovery Tool (available on the Barix WEB site) [1]
  1. If you still cannot reach the device, then force Factory Default. Depending on the firmware on the Barix device you have a Tab "Defaults" on the WEB Interface or depending on the HW you can do that by long press (>10sec) of the Reset button.
  1. If none of the previous action is successful you may need to do a Serial Resue. see http://wiki.barix.com/index.php5?title=FW_Update
  1. finally please contact your Barix distributor or Barix Support for help or a RMA


Back to Troubleshooting