Difference between revisions of "FAQ"

Line 45: Line 45:


* '''[[How do emergency messages work ?]]'''
* '''[[How do emergency messages work ?]]'''


== Audio FAQ ==
== Audio FAQ ==

Revision as of 00:02, 25 June 2009

General questions - IP, Addressing, Multicast etc

  • Ho do I do a web update of a device ? Please see FW Update
  • How do I perform a "Serial Rescue" of the device if it becomes unreachable ? Please see FW Update
  • SonicIP Voice - can I change this and record my own ? Yes, to do so follow this SonicIP Howto


Audio FAQ

Questions related to audio formats in general


Instreamer/ Encoding related questions

  • How do I configure a Instreamer-Exstreamer audio connection over the Internet (known as STL connection)? Please read the STL connection over Internet guide.
  • When using the Instreamer 100 to encode / feed a Shoutcast Server, how do I insert Artist / Title / Station-name text ? Please read how to send metadata


Exstreamer related questions

  • How do I know what the LED blinking means ? Please find that information in the "Exstreamer Technical Manual". (Faster Green and Red LED)
  • What is the capacity of contact of the relay in an Exstreamer-1000 ? 24V - 0,5A


Annuncicom related questions

  • What are the ratings for the relay on the Annuncicom ? The ratings for the relay are: max 50V/1A


IPAM related questions

Control FAQ

X8 related questions

  • How do i update an X8 with the latest firmware ?

You need a Barionet to do this. There is a special application for the Barionet which helps in doing this. Here is a detailed howto page on this wiki describing this: X8-Update

Barionet related questions

  • How do i read an I/O register using SNMP ?

All registers in the Barionet which hold I/O values can be read and written via SNMP. You can easily control the relays, for example, by using SNMP set requests on registers 1 and 2.

The detailed register map is documented in the Barionet manual.

How do the registers map to Object ID's ?

This is defined in the Barionet MIB, which is included in the device (you can access it with the URL /barionet.mib on the device), and on the Barix website. Here is, for example, the OID for register 201 (digital input 1):

1.3.6.1.4.1.17491.1.1.2.1.2.201.0

Note the .0 at the end - and the number before is the register.


Back to Main Page#Support - FAQ & Troubleshooting