Difference between revisions of "FAQ"

Line 14: Line 14:


* '''I want to do a broadcast over different subnets, is that possible ?'''
* '''I want to do a broadcast over different subnets, is that possible ?'''
* '''[[How do I make a "Serial Rescue" of the device if it turns unreachable?]]'''
First of all you have to do this not by web browser but using a serial crossover cable.
Download the corresponding firmware package of the device from Barix' website as usual. Once the firmware is downloaded and unzipped, you will find the file called "_readme1st.txt". Please follow the instructions contained there.
* '''[[What if the device is still unreachable after a serial rescue?]]'''
You can still use the "ARP" method to address the device, but for that you need a LOCAL connection.
After doing factory defaults, you can ALWAYS use the ARP method or serial method to set up an ip address to the unit and enter the configuration and re-enable it.
To use the arp-command to set an IP address to the Exstreamer manually, please do the following:
- connect power, loudspeaker and the cable to the device
- open a cmd console at your PC, using Windows do the following: "Start Button" --> "Execute" --> "cmd"
- type in "arp -s <ip address> <MAC address> (e.g. arp -s 192.168.0.201 00-08-e1-00-6c-e7)
- type in "telnet <ip address> 1 (e.g. telnet 192.168.0.201 1)
A connection will be initialised. After a short period (app. 2 seconds) you'll get an error message, that´s ok !!
Now the device has learned the ip address and you should be able to configure the device through your browser.


== Audio FAQ ==
== Audio FAQ ==

Revision as of 22:40, 21 December 2008

FAQ

This is a list of common questions and answers, for most of the answers a detailed description is linked

General questions - IP, Addressing, Multicast etc

  • Do the Barix products support Multicast and IGMP ?

Yes, the Barix products do fully support Multicast and IGMP. However, depending on the firmware and application used, there maybe are some caveats. Read more here: Barix Multicast Implementation

  • Do the Barix products support IPv6 ?

No, at the current time, no IPv6 support is implemented in the Barix products

  • I want to set up a local network with more than 250 devices, what do i have to do ?
  • I want to do a broadcast over different subnets, is that possible ?

First of all you have to do this not by web browser but using a serial crossover cable. Download the corresponding firmware package of the device from Barix' website as usual. Once the firmware is downloaded and unzipped, you will find the file called "_readme1st.txt". Please follow the instructions contained there.

You can still use the "ARP" method to address the device, but for that you need a LOCAL connection. After doing factory defaults, you can ALWAYS use the ARP method or serial method to set up an ip address to the unit and enter the configuration and re-enable it. To use the arp-command to set an IP address to the Exstreamer manually, please do the following: - connect power, loudspeaker and the cable to the device - open a cmd console at your PC, using Windows do the following: "Start Button" --> "Execute" --> "cmd" - type in "arp -s <ip address> <MAC address> (e.g. arp -s 192.168.0.201 00-08-e1-00-6c-e7) - type in "telnet <ip address> 1 (e.g. telnet 192.168.0.201 1) A connection will be initialised. After a short period (app. 2 seconds) you'll get an error message, that´s ok !! Now the device has learned the ip address and you should be able to configure the device through your browser.

Audio FAQ

Instreamer/ Encoding related questions

  • Can the Instreamer also encode with WMA ?

No. The Instreamer can encode only MP3, PCM or G711.

  • I want to play the stream of an Instreamer with Windows Media Player, but it does not work
  • Do you have a product to encode AACplus (or a plan to do this ?)

Exstreamer related questions

  • SonicIP Voice - can i change this and record my own ?

Yes, to do so follow this SonicIP Howto.

Annuncicom related questions

  • Can I build an intercom system with Annuncicom?

Yes, use the PS16 as the central station. Follow this howto to set up the system.

Control FAQ

X8 related questions

  • How do i update an X8 with the latest firmware ?

You need a Barionet to do this. There is a special application for the Barionet which helps in doing this. Here is a detailed howto page on this wiki describing this: X8-Update