Difference between revisions of "Barionet 1xxx"

@@ Line 1: / Line 1: @@
 ==Configuring the Barix Barionet 1000 as an access point==
-===HowTo===
-[[Image:Bari1.png|50px|thumb|right]]
-[[Image:Bari2.png|50px|thumb|right]]
-[[Image:Bari3.png|50px|thumb|right]]
-[[Image:Bari4.png|50px|thumb|right]]
-[[Image:Bari5.png|50px|thumb|right]]
-) First, we need to Configure the LAN IP<br>
-[[Image:Bari1.png|50px|thumb|right]]<br>
-) Then, we need to delete the WLAN IP. You should get a similar image after deletion of the WLAN<br>
-) Associate this to the LAN<br>
-) Make sure to check the LAN field<br>
-) After doing '''Save and Apply'''<br>
-Back to [[FAQ]]

Revision as of 14:09, 11 July 2017