Defconlock
Revision as of 00:17, 22 January 2009 by Jrietschel (talk | contribs) (New page: Defconlock - this page is under construction. == Pinout / connection diagram for wiegand reader == Up to two Wiegand readers can be connected to a Defconlock/Barionet. Here is the reco...)
Defconlock - this page is under construction.
Pinout / connection diagram for wiegand reader
Up to two Wiegand readers can be connected to a Defconlock/Barionet. Here is the recommended pinout to be used with the Defconlock application:
- Input 1 - Door contact
- Input 2 - Request to Exit
- Input 3 - Door Tamper contact
- Input 4 - Door locked
- Input 5 - D0 of first reader
- Input 6 - D1 of first reader
- Input 7 - (D0 of second reader, if used)
- Input 8 - (D1 of second reader, if used)
- Output 1 - Green LED control
- Output 2 - Red LED control
- Output 3 - Beeper control
- Output 4 - (local alarm, if used)
For a typical reader such as the HID Proxpoint Plus, this results in the following wiring
- J6 pin 1 .. pin 4 ... connected to door
- J6 pin 5: green
- J6 pin 6: white
- J6 pin 9: shield ground
- J6 pin 10: orange
- J6 pin 11: brown
- J6 pin 12: yellow
- J6 pin 13: blue
- J6 pin 14: black
- J6 pin 15: red (assuming Barionet is powered with less than 16V and reader can use that voltage)
