Failure Check List

Revision as of 22:32, 22 January 2010 by Domenico (talk | contribs)

Few steps to analyze if the Barix device is dead.

  1. If the device is not announcing the sonic IP, try by using the Discovery Tool (available on the Barix WEB site) [1]
  1. If you still cannot reach the device, then force Factory Default. Depending on the application you have a Tab "Default" on the WEB Interface or depending on the HW you can do that by long press (>10sec) the Reset button.
  1. If none of the previous action is successful you may need to do a Serial Resue. see http://wiki.barix.com/index.php5/FW_Update
  1. finally please contact your Barix distributor or Barix Support for a RMA
Retrieved from "https://wiki.barix.com/index.php?title=Failure_Check_List&oldid=1656"