RTP
RTP Protocol
RTP (Real-time Transport Protocol) has been designed for the transport of multimedia streams over IP networks. Implementation is based on the User Datagram Protocol (UDP). As IP networks are asynchronous, packets may be lost or delivered in different order. RTP provides no guarantee of the delivery, but sequencing of the data makes it possible to detect missing packets.
Payload Type
describes the transport of a particular media format. Some values of the audio payload formats are standard others need to be described in a service description protocol, SDP (Session DescriptionProtocol); The following table shows the defined RTP payload types used in Barix firmware. Note that Payload types 0, 8, 10, 11 and 14 are defined by the RTP standard while types 96 to 112 (dynamic payload types) are Barix specific.
| μ-Law, 8bit, mono, 8kHz | |
| A-Law, 8bit, mono, 8kHz | |
| PCM 16bit, MSB first, signed, 44.1kHz stereo, left channel first | |
| PCM 16bit, MSB first, signed, 44.1kHz mono | |
| MPEG audio | |
| PCM, 16bit, MSB first, signed, 8kHz mono | |
| μ-Law, 8bit, mono, 24kHz | |
| A-Law, 8bit, mono, 24kHz | |
| PCM, 16bit, MSB first, signed, 24kHz mono | |
| μ-Law, 8bit, mono, 32kHzreserved | |
| A-Law, 8bit, mono, 32kHzreserved | |
| PCM, 16bit, MSB first, signed, 32kHz monoreserved | |
| PCM 16bit, MSB first, signed, 48kHz stereo, left channel first | |
| PCM, 16bit, LSB first, signed, 8kHz mono | |
| PCM, 16bit, LSB first, signed, 24kHz mono | |
| PCM, 16bit, LSB first, signed, 32kHz monoreserved | |
| PCM 16bit, LSB first, signed, 44.1kHz stereo, left channel first | |
| PCM 16bit, LSB first, signed, 48kHz stereo, left channel first | |
| μ-Law, 8bit, mono, 12kHz | |
| A-Law, 8bit, mono, 12kHz | |
| PCM, 16bit, MSB first, signed, 12kHz mono | |
| PCM, 16bit, LSB first, signed, 12kHz mono | |
| Generic (see below) |
Sequence Number
is primarily used to identify and detect lost packets and secondly to reconstruct the order in which packets where sent, which may make loss detection easier;
Time Stamp
is the sampling instant for the first octet of media data in a packet. It can be used to help recover the clock frequency at the receiving side, if it is not given by other means.
References
Check the Wikipedia for an introduction to the RTP protocol [1].
