<html>

<head> <meta http-equiv=Content-Type content="text/html; charset=unicode"> <meta name=Generator content="Microsoft Word 15 (filtered)"> <title>How to configure the Barionet 1000 as a Wi-Fi client</title> <style> </style>

</head>

How to configure the Barionet 1000 as a Wi-Fi client

On this chapter, you will learn how to configure the Barionet 1000 to act as a Wi-Fi client. By default, the Barionet 1000 acts as a Wireless Access Point (WAP).

Prerequisites:

Barionet 1000 with the firmware “openwrt-ramips-mt7620-bar1koem-a1-squashfs-sysupgrade-4.bin” installed
It is assumed that you can browse your device using the WebUI.

Steps to follow:

Go to the menu Network --> Interfaces

On the Wireless Overview, you will see an SSID called “Barionet_1165” or similar. Remove it.

After that, click on the button Scan

After the Scan, you will see a list of the available SSID that are reachable from your Barionet 1000.

Then, just click on “Join Network” and you will see the next step

Add the Wi-Fi password at the “WPA passphrase” area and click “Submit.

On the next page, click on “Save & Apply”

After that, you will need to wait around 10 seconds and your Barionet 1000 will be connected to your Wireless network.

</body>

</html>

Barionet 1xxx

How to configure the Barionet 1000 as a Wi-Fi client

Prerequisites:

Steps to follow: