Source to multipoint distribution

Sending Meta-data from the Instreamer

To send metadata please use the E=command. After the "E" parameter, you should see the song´s title. The command is extreamely key sensitive. The correct syntax is:

http://<ip-instreamer>/rc.cgi?E=StreamTitle='Title';

The Keyword: "StreamTitle" must be written as it is in the example. Please do not forget the " ' "signs and the " ; " at the end of the command.

The E=command work on Internet Radio mode. It could also sucessfully transfer the metadata through a Shoutcast server, when the Shoutcast Server work in the RELAY mode.

Shoutcast config (Instreamer IP: 192.168.110.179):

RelayPort=8000
RelayServer=192.168.110.179

Instreamer Config:

Shoutcast Source: 0.0.0.0 : 8000

Back to Main Page#Applications#General Audio Distribution Applications