Barix Audio Product Matrix

Barix audio products are a combination of HW capabilities versus SW functionalities. Almost any SW version can be loaded on any HW device. The attached tables help you to find out which combination best fits your requirements. First look at what HW device provides the right capabilities and then look at what SW version enables the required features.

Device's Software Support Overview

	^{Ex 100}	^{Ex 110}	^{Ex 120}	^{Ex 200}	^{Ex P5}	^{Ex 1000}	^{In 100}	^{Ann 100}	^{Ann 155}	^{Ann 200}	^{Ann 1000}
^{Audio module}	^{IPAM 300}	^{IPAM 300}	^{IPAM 300}	^{IPAM 300}	^{IPAM 300}	^{IPAM 100}	^{IPAM 100}	^{IPAM 100}	^{IPAM 100}	^{IPAM 100}	^{IPAM 100}
^{Exstreamer FW}	^✔	^✔	^✔	^✔	^✔	^✔	-	^✔	^✔	^✔	^✔
^{Streaming Client}	^✔	^✔	^✔	^✔	^✔	^✔	-	^✔	^✔	^✔	^✔
^{Instreamer FW}	-	-	-	-	-	^✔	^✔	^✔	^✔	^✔	^✔
^{Annuncicom FW}	^✔	^✔	^✔	^✔	^✔	^✔	^✔	^✔	^✔	^✔	^✔
^{ABCL annunfdx}	^✔	^✔	^✔	^✔	^✔	^✔	^✔	^✔	^✔	^✔	^✔

Hardware Features

^{Audio Codec}	^{Ex 100}	^{Ex 110}	^{Ex 120}	^{Ex 200}	^{Ex P5}	^{Ex 1000}	^{In 100}	^{Ann 100}	^{Ann 155}	^{Ann 200}	^{Ann 1000}
^{Audio module}	^{IPAM 300}	^{IPAM 300}	^{IPAM 300}	^{IPAM 300}	^{IPAM 300}	^{IPAM 100}	^{IPAM 100}	^{IPAM 100}	^{IPAM 100}	^{IPAM 100}	^{IPAM 100}
^PCM/G711	^dec	^dec	^dec	^dec	^dec	^{dec & enc}	^{dec & enc}	^{dec & enc}	^{dec & enc}	^{dec & enc}	^{dec & enc}
^MPEG	^dec	^dec	^dec	^dec	^dec	^{dec & enc}	^{dec & enc}	^{dec & enc}	^{dec & enc}	^{dec & enc}	^{dec & enc}
^AAC	^dec	^dec	^dec	^dec	^dec
^WMA	^dec	^dec	^dec	^dec	^dec
^{"dec" stands for decoding, "enc" for encoding}
^{Audio Interfaces}	^{Ex 100}	^{Ex 110}	^{Ex 120}	^{Ex 200}	^{Ex P5}	^{Ex 1000}	^{In 100}	^{Ann 100}	^{Ann 155}	^{Ann 200}	^{Ann 1000}
^{Microphone In (& Bias)}								^unbalanced	^balanced	^unbalanced	^balanced
^{Microphone Type}								^electret	^electret	^electret	^{elec., coil}
^{Mic Bias DC}								^{2.7 V}	^{3.4 V}	^2.7	^{12 V sup / 0 V}
^{Analog Input}						^{stereo bal.}	^{stereo unb.}	^{mono unb.}	^{mono unb.}	^{mono unb.}	^{stereo bal.}
^{Analog Output}	^{stereo unb.}	^{stereo unb.}	^{stereo unb.}			^{stereo bal.}		^{mono unb.}	^{mono bal.}	^{mono unb.}	^{stereo bal.}
^{Headphone Output}	^✔	^✔	^✔	^✔			^✔
^{Speaker Output}				^{2 x 25W}	^{1 x 5W}			^{1 x 2W}	^{1 x 5W}	^{1 x 8W}
^{S/P DIF Input}							^{opt. & coax}
^{S/P DIF Output}				^optical
^{AES/EBU Interface}						^{in & out}
^{Aiphone SUB Interface}										^✔
^{"unb." stands for unbalanced, "bal." for balanced,"sup" for current supervision}
^{Other Interfaces}	^{Ex 100}	^{Ex 110}	^{Ex 120}	^{Ex 200}	^{Ex P5}	^{Ex 1000}	^{In 100}	^{Ann 100}	^{Ann 155}	^{Ann 200}	^{Ann 1000}
^Ethernet	^{1 x RJ45}	^{1 x RJ45}	^{1 x RJ45}	^{1 x RJ45}	^{1 x RJ45}	^{1 x RJ45}	^{1 x RJ45}	^{1 x RJ45}	^{2 x RJ45}	^{1 x RJ45}	^{2 x RJ45}
^RS-232	^✔	^✔	^✔	^✔		^✔	^✔	^✔		^✔	^✔
^RS-485						^✔		^✔	^✔	^✔	^✔
^{Infared receiver}		^✔	^✔	^✔
^{Infared output}							^✔
^{Dry Contact Input}						⁴		²	²	²	⁸
^{Relay Output}		^{1 NO}	^{1 NO}			^{4 NO}		^{1 NO}		^{1 NO}	^{8 NO, 1 NC}
^{Flash Memory Interface}	^USB	^USB	^microSD	^USB		^USB		^USB		^USB
^{LCD Display}		^✔	^✔
^{Status LEDs}	^✔			^✔	^✔	^✔	^✔	^✔	^✔	^✔	^✔
^{I/O LEDs}						⁴					⁸
^{"NO" stands for Normally Open, "NC" for Normally Closed}
^{Power Supply}	^{Ex 100}	^{Ex 110}	^{Ex 120}	^{Ex 200}	^{Ex P5}	^{Ex 1000}	^{In 100}	^{Ann 100}	^{Ann 155}	^{Ann 200}	^{Ann 1000}
^{DC Voltage range}	^{9..30 V}	^{9..30 V}	^{9..30 V}	^{24 V}	^{48 V}	^{24..48 V}	^{9..30 V}	^{9..30 V}	^{24..48 V}	^{16..30 V, 48V}	^{2 x sup 24..48 V}
^{AC Voltage range}	^{12..24 V}	^{12..24 V}	^{12..24 V}				^{12..24 V}	^{12..24 V}		^{16..24 V}
^{PoE 802.3af}					^✔					^✔
^{"sup" stands for voltage supervision}

SW features (1) per FW version

SW features (2) per FW version

SW features (3) per FW version