USB device compatibility list
Most Barix devices feature an extension port for attaching USB 1.1 compatible mass storage devices (hard disks or FLASH disks).
Limitations
The extension port is not fully USB 1.1 compatible and has the following limitations:
- only the Mass Storage class is supported
- HUBs are not supported (certain flash disks contain an embedded hub)
- only the first partition is supported
- the partition must be formatted as FAT16
- maximum partition size 4GB
Most of the existing flash disks are supported. However, if you want to make sure that your flash disk is supported buy one from the below list.
100% compatible flash disks
The below devices have been tested and proven to work:
| Name | Capacity | USB version | Vendor ID | Model ID | Manufacturer Name | Product Name |
| A-Data "Show me disk" 1GB | 1GB | 2.0 | 0x0457 | 0x0151 | - not specified - | USB Mass Storage Device |
| Barix 64MB Flash Disk | 64MB | 2.0 | 0x090c | 0x1000 | SMI Corporation | USB DISK |
| Barix 256MB Flash Disk | 256MB | 2.0 | 0x1516 | 0x8628 | Flash | Drive AL_USB20 |
| CBM 64MB | 64MB | 0x0204 | 0x6025 | CBM | Flash Disk |
Incompatible devices
The following devices are not compatible with Barix devices:
