Difference between revisions of "Source to multipoint distribution"
AchimSchoene (talk | contribs) |
AchimSchoene (talk | contribs) |
||
| Line 9: | Line 9: | ||
The Keyword: "StreamTitle" must be written as it is in the example. Please do not forget the " ' "signs and the " ; " at the end of the command. | The Keyword: "StreamTitle" must be written as it is in the example. Please do not forget the " ' "signs and the " ; " at the end of the command. | ||
The E= command work on Internet Radio mode. It could also sucessfully transfer the metadata through a Shoutcast server, when the Shoutcast Server work in the RELAY mode. | The E=command work on Internet Radio mode. It could also sucessfully transfer the metadata through a Shoutcast server, when the Shoutcast Server work in the RELAY mode. | ||
Shoutcast config: | |||
Shoutcast config (Instreamer IP: 192.168.110.179): | |||
RelayPort=8000 | RelayPort=8000 | ||
RelayServer=192.168.110.179 | RelayServer=192.168.110.179 | ||
Instreamer Config: | Instreamer Config: | ||
Shoutcast Source : 0.0.0.0 : 8000 | Shoutcast Source : 0.0.0.0 : 8000 | ||
Revision as of 10:52, 29 January 2009
Sending Meta-data from the Instreamer
To send metadata please use the E=command. After the "E" parameter, you should see the song´s title. The command is extreamely key sensitive. The correct syntax is:
http://<ip-instreamer>/rc.cgi?E=StreamTitle='Title';
The Keyword: "StreamTitle" must be written as it is in the example. Please do not forget the " ' "signs and the " ; " at the end of the command.
The E=command work on Internet Radio mode. It could also sucessfully transfer the metadata through a Shoutcast server, when the Shoutcast Server work in the RELAY mode.
Shoutcast config (Instreamer IP: 192.168.110.179):
RelayPort=8000 RelayServer=192.168.110.179
Instreamer Config:
Shoutcast Source : 0.0.0.0 : 8000
