Difference between revisions of "Defconlock"
Jrietschel (talk | contribs) (New page: Defconlock - this page is under construction. == Pinout / connection diagram for wiegand reader == Up to two Wiegand readers can be connected to a Defconlock/Barionet. Here is the reco...) |
|||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
Defconlock - this | Defconlock - Barix brands the Barionet with a preloaded access control application as a "Defconlock". | ||
Currently, rudimentary/preliminary code is provided to those interested on a case by case basis, the product "Defconlock" is not yet finished. However, in this area on the wiki you can find code, pinouts, tips and tricks related to useing a wiegand reader with the Barionet | |||
== Wiegand sample code == | |||
The sample code posted here opens the wiegand interface, a tcp listen socket, and then starts collecting wiegand scans of up to 2 readers connected directly to the Barionet. 26bit and 40bit cards are understood, decoded, and the resulting binary data is written into a "queue". If a host connects (or is connected) via TCP to the listening socket, it will receive the ID data and reader (1 or 2) information over the TCP connection. | |||
Again - this is sample code, not a finished application. Use as you wish ! | |||
**** source code will be posted as soon as .zip/.bas uploads are possible **** | |||
| Line 31: | Line 39: | ||
* J6 pin 14: black | * J6 pin 14: black | ||
* J6 pin 15: red (assuming Barionet is powered with less than 16V and reader can use that voltage) | * J6 pin 15: red (assuming Barionet is powered with less than 16V and reader can use that voltage) | ||
Back to [[Main Page#Products]] | |||
Latest revision as of 21:21, 13 March 2009
Defconlock - Barix brands the Barionet with a preloaded access control application as a "Defconlock".
Currently, rudimentary/preliminary code is provided to those interested on a case by case basis, the product "Defconlock" is not yet finished. However, in this area on the wiki you can find code, pinouts, tips and tricks related to useing a wiegand reader with the Barionet
Wiegand sample code
The sample code posted here opens the wiegand interface, a tcp listen socket, and then starts collecting wiegand scans of up to 2 readers connected directly to the Barionet. 26bit and 40bit cards are understood, decoded, and the resulting binary data is written into a "queue". If a host connects (or is connected) via TCP to the listening socket, it will receive the ID data and reader (1 or 2) information over the TCP connection. Again - this is sample code, not a finished application. Use as you wish !
**** source code will be posted as soon as .zip/.bas uploads are possible ****
Pinout / connection diagram for wiegand reader
Up to two Wiegand readers can be connected to a Defconlock/Barionet. Here is the recommended pinout to be used with the Defconlock application:
- Input 1 - Door contact
- Input 2 - Request to Exit
- Input 3 - Door Tamper contact
- Input 4 - Door locked
- Input 5 - D0 of first reader
- Input 6 - D1 of first reader
- Input 7 - (D0 of second reader, if used)
- Input 8 - (D1 of second reader, if used)
- Output 1 - Green LED control
- Output 2 - Red LED control
- Output 3 - Beeper control
- Output 4 - (local alarm, if used)
For a typical reader such as the HID Proxpoint Plus, this results in the following wiring
- J6 pin 1 .. pin 4 ... connected to door
- J6 pin 5: green
- J6 pin 6: white
- J6 pin 9: shield ground
- J6 pin 10: orange
- J6 pin 11: brown
- J6 pin 12: yellow
- J6 pin 13: blue
- J6 pin 14: black
- J6 pin 15: red (assuming Barionet is powered with less than 16V and reader can use that voltage)
Back to Main Page#Products
