Latest revision as of 16:32, 14 July 2011

Automation and Control Product Matrix

Barix automation and control products consist of two device groups: the BCL programmable Barionet controllers and the Modbus I/O devices. The latter can be used in standard modbus applications or can serve as a modbus extension to a Barionet device. Use the following comparison table to distinguish which device(s) suit your application.

Comparison of HW and SW features

	Barionet 50	Barionet 100	IO12	R6	X8
Device Type	Programmable Controller	Programmable Controller	Modbus I/O	Modbus I/O	Modbus I/O
Ethernet	10/100 auto	10/100 auto
Modbus Type (TCP)	Slave (RTU)	Slave (RTU)
Modbus Type (RS-485)	Master	Master	Slave	Slave	Slave
RS-485 Baudrate	300..230400	300..19200	9600/19200	9600/19200	9600/19200
RS-422 (4-wire)		✔
RS-232 Signals	TxD, RxD, RTS, CTS, GND	TxD, RxD, RTS, CTS, GND
RS-232 Baudrate	300..230400	300..19200
Wiegand input		2 ^[1]
Dallas 1-Wire bus	1	1			0..8 ^[2]
Analog Inputs		4 ^[3]			0..8 ^[2]
Digital Inputs	4 dry contact (fixed pull-up)	8 dry contact / 0..5VDC (selectable pull-up)	12 Opto isolated 0..32VDC		0..8 ^[2]
Digital Outputs		4 (24VDC 0.1A sink)	12 (32VDC 0.7A source)
Relay Outputs	4 NO (30V 0.5A)	2 NO (250V 5A)		6 NO (250V 10A)
DIN rail mounting	✔	✔	✔	✔

^{[1] Select either Dallas 1-Wire® support or 2 Wiegand® protocol interfaces.}
^{[2] Select either Analog In, Digital In, Digital Out or Dallas 1-Wire® support for each of the 8 I/Os independently.}
^{[3] Inputs 1 to 4 are hardwired to both analog and digital detection circuits/registers.}

Back to Main Page

@@ Line 4: / Line 4: @@
 ==Comparison of HW and SW features==
 {|
-|+align="bottom" style="bold" |''Table: Comparison of HW and SW features''
+<!-- |+align="bottom" style="bold" |''Table: Comparison of HW and SW features'' -->
 !width="145"  |
-!width="120" bgcolor="#F00" align="center" style="color:#FFF;"| Barionet 50
+!width="120" bgcolor="#FF0000" align="center" style="color:#FFFFFF;"| Barionet 50
-!width="120" bgcolor="#F00" align="center" style="color:#FFF;"| Barionet 100
+!width="120" bgcolor="#FF0000" align="center" style="color:#FFFFFF;"| Barionet 100
-!width="120" bgcolor="#F00" align="center" style="color:#FFF;"| IO12
+!width="120" bgcolor="#FF0000" align="center" style="color:#FFFFFF;"| IO12
-!width="120" bgcolor="#F00" align="center" style="color:#FFF;"| R6
+!width="120" bgcolor="#FF0000" align="center" style="color:#FFFFFF;"| R6
-!width="120" bgcolor="#F00" align="center" style="color:#FFF;"| X8
+!width="120" bgcolor="#FF0000" align="center" style="color:#FFFFFF;"| X8
 |-
-!bgcolor="#DDD"| Device Type
+!bgcolor="#DDDDDD"| Device Type
-|bgcolor="#DDD" align="center" | Programmable Controller
+|bgcolor="#DDDDDD" align="center" | Programmable Controller
-|bgcolor="#DDD" align="center" | Programmable Controller
+|bgcolor="#DDDDDD" align="center" | Programmable Controller
-|bgcolor="#DDD" align="center" | Modbus I/O
+|bgcolor="#DDDDDD" align="center" | Modbus I/O
-|bgcolor="#DDD" align="center" | Modbus I/O
+|bgcolor="#DDDDDD" align="center" | Modbus I/O
-|bgcolor="#DDD" align="center" | Modbus I/O
+|bgcolor="#DDDDDD" align="center" | Modbus I/O
 |-
 ! Ethernet
@@ Line 26: / Line 26: @@
 ||
 |-
-!bgcolor="#DDD"| Modbus Type (TCP)
+!bgcolor="#DDDDDD"| Modbus Type (TCP)
-|bgcolor="#DDD" align="center" | Slave (RTU)
+|bgcolor="#DDDDDD" align="center" | Slave (RTU)
-|bgcolor="#DDD" align="center" | Slave (RTU)
+|bgcolor="#DDDDDD" align="center" | Slave (RTU)
-|bgcolor="#DDD"|
+|bgcolor="#DDDDDD"|
-|bgcolor="#DDD"|
+|bgcolor="#DDDDDD"|
-|bgcolor="#DDD"|
+|bgcolor="#DDDDDD"|
 |-
 ! Modbus Type (RS-485)
@@ Line 40: / Line 40: @@
 |align="center"| Slave
 |-
-!bgcolor="#DDD"| RS-485 Baudrate
+!bgcolor="#DDDDDD"| RS-485 Baudrate
-|bgcolor="#DDD" align="center" | 300..230400
+|bgcolor="#DDDDDD" align="center" | 300..230400
-|bgcolor="#DDD" align="center" | 300..19200
+|bgcolor="#DDDDDD" align="center" | 300..19200
-|bgcolor="#DDD" align="center" | 9600/19200
+|bgcolor="#DDDDDD" align="center" | 9600/19200
-|bgcolor="#DDD" align="center" | 9600/19200
+|bgcolor="#DDDDDD" align="center" | 9600/19200
-|bgcolor="#DDD" align="center" | 9600/19200
+|bgcolor="#DDDDDD" align="center" | 9600/19200
 |-
 ! RS-422 (4-wire)
@@ Line 54: / Line 54: @@
 ||
 |-
-!bgcolor="#DDD"|RS-232 Signals
+!bgcolor="#DDDDDD"|RS-232 Signals
-|bgcolor="#DDD" align="center" |  TxD, RxD, RTS, CTS, GND
+|bgcolor="#DDDDDD" align="center" |  TxD, RxD, RTS, CTS, GND
-|bgcolor="#DDD" align="center" | TxD, RxD, RTS, CTS, GND
+|bgcolor="#DDDDDD" align="center" | TxD, RxD, RTS, CTS, GND
-|bgcolor="#DDD"|
+|bgcolor="#DDDDDD"|
-|bgcolor="#DDD"|
+|bgcolor="#DDDDDD"|
-|bgcolor="#DDD"|
+|bgcolor="#DDDDDD"|
 |-
 ! RS-232 Baudrate
@@ Line 68: / Line 68: @@
 ||
 |-
-!bgcolor="#DDD"|Wiegand IF
+!bgcolor="#DDDDDD"|Wiegand input
-|bgcolor="#DDD"|
+|bgcolor="#DDDDDD"|
-|bgcolor="#DDD" align="center" | 2 <sup>[1]
+|bgcolor="#DDDDDD" align="center" | 2 <sup>[1]
-|bgcolor="#DDD"|
+|bgcolor="#DDDDDD"|
-|bgcolor="#DDD"|
+|bgcolor="#DDDDDD"|
-|bgcolor="#DDD"|
+|bgcolor="#DDDDDD"|
 |-
-! 1-Wire IF
+! Dallas 1-Wire bus
 |align="center"| 1
 |align="center"| 1
@@ Line 82: / Line 82: @@
 |align="center"| 0..8 <sup>[2]
 |-
-!bgcolor="#DDD"| Analog Inputs
+!bgcolor="#DDDDDD"| Analog Inputs
-|bgcolor="#DDD"|
+|bgcolor="#DDDDDD"|
-|bgcolor="#DDD" align="center" | 4 <sup>[3]
+|bgcolor="#DDDDDD" align="center" | 4 <sup>[3]
-|bgcolor="#DDD"|
+|bgcolor="#DDDDDD"|
-|bgcolor="#DDD"|
+|bgcolor="#DDDDDD"|
-|bgcolor="#DDD" align="center" | 0..8 <sup>[2]
+|bgcolor="#DDDDDD" align="center" | 0..8 <sup>[2]
 |-
 ! Digital Inputs
@@ Line 96: / Line 96: @@
 |align="center"| 0..8 <sup>[2]
 |-
-!bgcolor="#DDD"| Digital Outputs
+!bgcolor="#DDDDDD"| Digital Outputs
-|bgcolor="#DDD"|
+|bgcolor="#DDDDDD"|
-|bgcolor="#DDD" align="center" | 4 (24VDC 0.1A sink)
+|bgcolor="#DDDDDD" align="center" | 4 (24VDC 0.1A sink)
-|bgcolor="#DDD" align="center" | 12 (32VDC 0.7A source)
+|bgcolor="#DDDDDD" align="center" | 12 (32VDC 0.7A source)
-|bgcolor="#DDD"|
+|bgcolor="#DDDDDD"|
-|bgcolor="#DDD"|
+|bgcolor="#DDDDDD"|
 |-
-! Relais Out
+! Relay Outputs
 |align="center"| 4 NO (30V 0.5A)
 |align="center"| 2 NO (250V 5A)
@@ Line 110: / Line 110: @@
 ||
 |-
-!bgcolor="#DDD"| DIN rail mounting
+!bgcolor="#DDDDDD"| DIN rail mounting
-|bgcolor="#DDD" align="center" | &#10004;
+|bgcolor="#DDDDDD" align="center" | &#10004;
-|bgcolor="#DDD" align="center" | &#10004;
+|bgcolor="#DDDDDD" align="center" | &#10004;
-|bgcolor="#DDD" align="center" | &#10004;
+|bgcolor="#DDDDDD" align="center" | &#10004;
-|bgcolor="#DDD" align="center" | &#10004;
+|bgcolor="#DDDDDD" align="center" | &#10004;
-|bgcolor="#DDD"|
+|bgcolor="#DDDDDD"|
+|-
+| colspan="6" | <sup>&nbsp;
 |-
 | colspan="6" | <sup>[1] Select either Dallas 1-Wire® support or 2 Wiegand® protocol interfaces.

Difference between revisions of "Automation and Control Product Matrix"

Latest revision as of 16:32, 14 July 2011

Automation and Control Product Matrix

Comparison of HW and SW features