Difference between revisions of "Barix Intercom System"
| Line 5: | Line 5: | ||
* one or two [[PS16]] stations | * one or two [[PS16]] stations | ||
* one or more Annuncicoms 100 or 200 | * one or more Annuncicoms 100 or 200 | ||
* for paging purposes (output only) the Exstreamer 100/200 can be used | |||
== Loading software == | == Loading software == | ||
To set up the intercom system you will need the ABCL package. The PS16 as well as the Annuncicom 200 should come with the ABCL preloaded. The Annuncicom 100 | To set up the intercom system you will need the ABCL package. The PS16 as well as the Annuncicom 200 should come with the ABCL preloaded. | ||
The other devices (Annuncicom 100, Exstreamer 100/200) must be loaded with the ABCL software. | |||
Download the latest version of ABCL from the [http://www.barix.com/downloads.php?pid=21 Barix Website] and upload to the devices using the [[Firmware upload | standard procedure]]. | Download the latest version of ABCL from the [http://www.barix.com/downloads.php?pid=21 Barix Website] and upload to the devices using the [[Firmware upload | standard procedure]]. | ||
Revision as of 13:53, 19 December 2008
This page describes how to set up a centrally driven intercom system with PS16 and Annuncicoms.
Requirements
You will need the following hardware:
- one or two PS16 stations
- one or more Annuncicoms 100 or 200
- for paging purposes (output only) the Exstreamer 100/200 can be used
Loading software
To set up the intercom system you will need the ABCL package. The PS16 as well as the Annuncicom 200 should come with the ABCL preloaded.
The other devices (Annuncicom 100, Exstreamer 100/200) must be loaded with the ABCL software.
Download the latest version of ABCL from the Barix Website and upload to the devices using the standard procedure.
Configuring the PS16
Open the WEB UI of the PS16 in your browser and in the Application field select Intercom Master Station, then press Apply.
