Difference between revisions of "SoundScape - IT Network Requirements"
(New page: Before connecting the devices to the retailers network, it would be better to check the next list: * Share with the administrator of the network the MAC of the SoundScape devices that you...) |
|||
| Line 4: | Line 4: | ||
* Ask for an Static IP (one for each device). Also ask for the network settings: Netmask, Gateway and Primary DNS. Apply the setting on your SoundScape devices. | * Ask for an Static IP (one for each device). Also ask for the network settings: Netmask, Gateway and Primary DNS. Apply the setting on your SoundScape devices. | ||
It is also important to open the following ports for each Static IP/MAC: | |||
* HTTP, port 80, to browse the WebUI of the device from the local network | * HTTP, port 80, to browse the WebUI of the device from the local network | ||
* NTP, port 123, outgoing traffic to the Internet | * NTP, port 123, outgoing traffic to the Internet | ||
* To connect the devices to the network you will need to plug a standard network cable into the network port of the Exstreamer (RJ45 Ethernet socket) | * To connect the devices to the network you will need to plug a standard network cable into the network port of the Exstreamer (RJ45 Ethernet socket) | ||
Revision as of 13:46, 11 November 2015
Before connecting the devices to the retailers network, it would be better to check the next list:
- Share with the administrator of the network the MAC of the SoundScape devices that you are planning to install.
- Ask for an Static IP (one for each device). Also ask for the network settings: Netmask, Gateway and Primary DNS. Apply the setting on your SoundScape devices.
It is also important to open the following ports for each Static IP/MAC:
- HTTP, port 80, to browse the WebUI of the device from the local network
- NTP, port 123, outgoing traffic to the Internet
- To connect the devices to the network you will need to plug a standard network cable into the network port of the Exstreamer (RJ45 Ethernet socket)
