Difference between revisions of "Failure Check List"
| Line 1: | Line 1: | ||
The Steps to analyze if the Barix device is dead. | The Steps to analyze if the Barix device is dead. | ||
# If the device is not announcing the sonic IP, try by using the Discovery Tool (available on the Barix WEB site) [http://www.barix.com/downloads/Software_tools/221/] | |||
[http://www.barix.com/downloads/Software_tools/221/] | |||
# If you still cannot reach the device, then force Factory Default. Depending on the application you have a Tab "Default" on the WEB Interface or depending on the HW you can do that by long press (>10sec) the Reset button. | |||
Depending on the application you have a Tab "Default" on the WEB Interface or | |||
depending on the HW you can do that by long press (>10sec) the Reset button. | |||
# If none of the previous action is successful you may need to do a Serial Resue. see ''http://wiki.barix.com/index.php5/FW_Update'' | |||
see ''http://wiki.barix.com/index.php5/FW_Update'' | |||
# finally please contact your Barix distributor or Barix Support for a RMA | |||
Revision as of 22:32, 22 January 2010
The Steps to analyze if the Barix device is dead.
- If the device is not announcing the sonic IP, try by using the Discovery Tool (available on the Barix WEB site) [1]
- If you still cannot reach the device, then force Factory Default. Depending on the application you have a Tab "Default" on the WEB Interface or depending on the HW you can do that by long press (>10sec) the Reset button.
- If none of the previous action is successful you may need to do a Serial Resue. see http://wiki.barix.com/index.php5/FW_Update
- finally please contact your Barix distributor or Barix Support for a RMA
