SoundScape - IT Network Requirements - Revision history

Elias: /* SoundScape - IT Network Requirements */

2017-12-07T09:14:59Z

SoundScape - IT Network Requirements

← Older revision		Revision as of 09:14, 7 December 2017
Line 8:		Line 8:

	It is also important to open the following ports for outgoing traffic of each Static IP/MAC:		It is also important to open the following ports for outgoing traffic of each Static IP/MAC:
	* HTTP, port 80, to allow the device contacting the Soundscape portal for normal operations and download. The audio tracks are ~~already~~ encrypted.		* HTTP, port 80, to allow the device contacting the Soundscape portal for normal operations and download. The audio tracks are encrypted.
	* HTTPS, port 443, to allow the device contacting the Soundscape portal for special information.		* HTTPS, port 443, to allow the device contacting the Soundscape portal for special information.
	* NTP, port 123, as the device needs to be able to reach an NTP server. The network needs to allow traffic through port 123 which is the port used by the NTP service that can sync the time from a reference NTP server in the network.		* NTP, port 123, as the device needs to be able to reach an NTP server. The network needs to allow traffic through port 123 which is the port used by the NTP service that can sync the time from a reference NTP server in the network.

Elias: /* SoundScape - IT Network Requirements */

2017-12-07T09:14:11Z

SoundScape - IT Network Requirements

← Older revision		Revision as of 09:14, 7 December 2017
Line 1:		Line 1:
	== SoundScape - IT Network Requirements ==		== SoundScape - IT Network Requirements ==

	Before connecting the devices to the ~~retailers~~ network, it would be better to check the next list:		Before connecting the devices to the retailer's network, it would be better to check the next list:

	* Share with the administrator of the network the MAC of the SoundScape devices that you are planning to install.		* Share with the administrator of the network the MAC of the SoundScape devices that you are planning to install.
Line 8:		Line 8:

	It is also important to open the following ports for outgoing traffic of each Static IP/MAC:		It is also important to open the following ports for outgoing traffic of each Static IP/MAC:
	* HTTP, port 80, to allow the device contacting the Soundscape portal for normal operations and download.		* HTTP, port 80, to allow the device contacting the Soundscape portal for normal operations and download. The audio tracks are already encrypted.
	* HTTPS, port 443, to allow the device contacting the Soundscape portal for special information.		* HTTPS, port 443, to allow the device contacting the Soundscape portal for special information.
	* NTP, port 123, as device needs to be able to reach an NTP server. The network needs to allow traffic through port 123 which is the port used by the NTP service that can sync the time from a reference NTP server in the network.		* NTP, port 123, as the device needs to be able to reach an NTP server. The network needs to allow traffic through port 123 which is the port used by the NTP service that can sync the time from a reference NTP server in the network.

Domenico at 16:06, 16 November 2015

2015-11-16T16:06:52Z

← Older revision		Revision as of 16:06, 16 November 2015
Line 8:		Line 8:

	It is also important to open the following ports for outgoing traffic of each Static IP/MAC:		It is also important to open the following ports for outgoing traffic of each Static IP/MAC:
	* HTTP, port 80, to allow the device contacting the Soundscape portal.		* HTTP, port 80, to allow the device contacting the Soundscape portal for normal operations and download.
	* HTTPS, port 443, to allow the device contacting the Soundscape portal.		* HTTPS, port 443, to allow the device contacting the Soundscape portal for special information.
	* NTP, port 123, as device needs to be able to reach an NTP server. The network needs to allow traffic through port 123 which is the port used by the NTP service that can sync the time from a reference NTP server in the network.		* NTP, port 123, as device needs to be able to reach an NTP server. The network needs to allow traffic through port 123 which is the port used by the NTP service that can sync the time from a reference NTP server in the network.

Domenico at 15:27, 16 November 2015

2015-11-16T15:27:52Z

← Older revision		Revision as of 15:27, 16 November 2015
Line 4:		Line 4:

	* Share with the administrator of the network the MAC of the SoundScape devices that you are planning to install.		* Share with the administrator of the network the MAC of the SoundScape devices that you are planning to install.
	* Ask for an Static IP (one for each device). Also ask for the network settings: Netmask, Gateway and Primary DNS. Apply the setting on your SoundScape devices.		* Ask for a Static IP (one for each device). Also ask for the network settings: Netmask, Gateway and Primary DNS. Apply the setting on your SoundScape devices.
			* To connect the devices to the network you will need to plug a standard network cable into the network port of the Exstreamer (RJ45 Ethernet socket)

			It is also important to open the following ports for outgoing traffic of each Static IP/MAC:
			* HTTP, port 80, to allow the device contacting the Soundscape portal.
			* HTTPS, port 443, to allow the device contacting the Soundscape portal.
			* NTP, port 123, as device needs to be able to reach an NTP server. The network needs to allow traffic through port 123 which is the port used by the NTP service that can sync the time from a reference NTP server in the network.

	~~It is also important to open the following ports for each Static IP/MAC:~~
	* HTTP, port 80, to browse the WebUI of the device from the local network
	* NTP, port 123, outgoing traffic to the Internet. The SoundScape device needs to be able to reach an NTP server. The network needs to allow traffic through port 123 which is the port used by the NTP service that can sync the time from a reference NTP server in the network.
	* To connect the devices to the network you will need to plug a standard network cable into the network port of the Exstreamer (RJ45 Ethernet socket)


	Back to [[SoundScape]] <br>		Back to [[SoundScape]] <br>
	Back to [[SoundScape - FAQ]]		Back to [[SoundScape - FAQ]]

Elias: /* SoundScape - IT Network Requirements */

2015-11-12T10:09:20Z

SoundScape - IT Network Requirements

← Older revision		Revision as of 10:09, 12 November 2015
Line 8:		Line 8:
	It is also important to open the following ports for each Static IP/MAC:		It is also important to open the following ports for each Static IP/MAC:
	* HTTP, port 80, to browse the WebUI of the device from the local network		* HTTP, port 80, to browse the WebUI of the device from the local network
	* NTP, port 123, outgoing traffic to the Internet		* NTP, port 123, outgoing traffic to the Internet. The SoundScape device needs to be able to reach an NTP server. The network needs to allow traffic through port 123 which is the port used by the NTP service that can sync the time from a reference NTP server in the network.
	* To connect the devices to the network you will need to plug a standard network cable into the network port of the Exstreamer (RJ45 Ethernet socket)		* To connect the devices to the network you will need to plug a standard network cable into the network port of the Exstreamer (RJ45 Ethernet socket)

Elias: /* SoundScape - IT Network Requirements */

2015-11-11T15:01:54Z

SoundScape - IT Network Requirements

← Older revision		Revision as of 15:01, 11 November 2015
Line 12:		Line 12:


	Back to [[SoundScape]]		Back to [[SoundScape]] <br>
			Back to [[SoundScape - FAQ]]

Elias at 13:48, 11 November 2015

2015-11-11T13:48:20Z

← Older revision		Revision as of 13:48, 11 November 2015
Line 1:		Line 1:
	~~'''~~SoundScape - IT Network Requirements~~'''~~		== SoundScape - IT Network Requirements ==
	~~----~~

	Before connecting the devices to the retailers network, it would be better to check the next list:		Before connecting the devices to the retailers network, it would be better to check the next list:

Elias at 13:47, 11 November 2015

2015-11-11T13:47:48Z

← Older revision		Revision as of 13:47, 11 November 2015
Line 1:		Line 1:
	SoundScape - IT Network Requirements		'''SoundScape - IT Network Requirements'''
	----		----

Elias at 13:47, 11 November 2015

2015-11-11T13:47:31Z

← Older revision		Revision as of 13:47, 11 November 2015
Line 1:		Line 1:
			SoundScape - IT Network Requirements
			----

	Before connecting the devices to the retailers network, it would be better to check the next list:		Before connecting the devices to the retailers network, it would be better to check the next list:

Elias at 13:47, 11 November 2015

2015-11-11T13:47:12Z

← Older revision		Revision as of 13:47, 11 November 2015
Line 8:		Line 8:
	* NTP, port 123, outgoing traffic to the Internet		* NTP, port 123, outgoing traffic to the Internet
	* To connect the devices to the network you will need to plug a standard network cable into the network port of the Exstreamer (RJ45 Ethernet socket)		* To connect the devices to the network you will need to plug a standard network cable into the network port of the Exstreamer (RJ45 Ethernet socket)


			Back to [[SoundScape]]