SIP Paging - Revision history

StefanG: /* SIP Paging applications with Barix devices */

2013-04-10T13:29:12Z

SIP Paging applications with Barix devices

← Older revision		Revision as of 13:29, 10 April 2013
Line 15:		Line 15:

	So .. Barix devices are ideal SIP Paging and Intercom devices, useable in a vast range of applications.		So .. Barix devices are ideal SIP Paging and Intercom devices, useable in a vast range of applications.

			Back to [[Main_Page#Software_Topics]]

WikiSysop: Reverted edits by Yhorebapemy (Talk) to last version by Jrietschel

2010-11-18T10:14:58Z

Reverted edits by Yhorebapemy (Talk) to last version by Jrietschel

← Older revision		Revision as of 10:14, 18 November 2010
Line 1:		Line 1:
	>== SIP Paging applications with Barix devices ==		== SIP Paging applications with Barix devices ==

	Barix IP Audio devices are ideal products to extend a SIP based phone system (PBX) such as Cisco Callmanager, Asterisk or OpenSER with paging functionalities.~~<~~br~~>~~		Barix IP Audio devices are ideal products to extend a SIP based phone system (PBX) such as Cisco Callmanager, Asterisk or OpenSER with paging functionalities.<br>
	~~<~~br~~>~~		<br>
	All Barix Exstreamer and Annuncicom devices can be loaded with the SIP firmware (which is a free download from the website). Once this firmware is loaded, the devices provide a functionality similar to a specialized phone.		All Barix Exstreamer and Annuncicom devices can be loaded with the SIP firmware (which is a free download from the website). Once this firmware is loaded, the devices provide a functionality similar to a specialized phone.
	~~<~~br~~>~~		<br>

	For paging applications, an Exstreamer (output only) device suffices.~~<~~br~~>~~		For paging applications, an Exstreamer (output only) device suffices.<br>
	The device can be programmed to auto-answer an incoming phone call, activate a relay with call reception (to activate a paging amplifier, for example), and output the call audio received through its analog output. Depending on the device, you have a choice of line level, 600Ohm balanced or even 2W, 8W or 2x25W amplified output, suitable to directly drive overhead speakers.		The device can be programmed to auto-answer an incoming phone call, activate a relay with call reception (to activate a paging amplifier, for example), and output the call audio received through its analog output. Depending on the device, you have a choice of line level, 600Ohm balanced or even 2W, 8W or 2x25W amplified output, suitable to directly drive overhead speakers.
	Some device models (Exstreamer 110/120/500, Annuncicom 100,200,1000) provide at least one contact closure output (relay).~~<~~br~~>~~		Some device models (Exstreamer 110/120/500, Annuncicom 100,200,1000) provide at least one contact closure output (relay).<br>
	These contact closure outputs (up to 8 with the Annuncicom 1000) can be used for zone control, assuming that the SIP Paging gateway (Barix device with SIP firmware loaded) is connected to a traditional paging amplifier, which has inputs with which zones can be selected.		These contact closure outputs (up to 8 with the Annuncicom 1000) can be used for zone control, assuming that the SIP Paging gateway (Barix device with SIP firmware loaded) is connected to a traditional paging amplifier, which has inputs with which zones can be selected.
	Details on how (as an example) an Asterisk PBX is configured to drive the Zone Control relays on an Annuncicom 1000 are in this wiki article: [[Asterix_Server_configuration_for_Relay_control]]~~<~~br~~>~~		Details on how (as an example) an Asterisk PBX is configured to drive the Zone Control relays on an Annuncicom 1000 are in this wiki article: [[Asterix_Server_configuration_for_Relay_control]]<br>
	~~<~~br~~>~~		<br>
	Other PBX systems should work similar, and you can always control the relays even in-call by issuing certain commands to the device (common speak, you would say via DTMF, technically, button presses are typically delivered using SIP INfo or RFC 2833 encapsulation). Details are, again, in the article referred to above.		Other PBX systems should work similar, and you can always control the relays even in-call by issuing certain commands to the device (common speak, you would say via DTMF, technically, button presses are typically delivered using SIP INfo or RFC 2833 encapsulation). Details are, again, in the article referred to above.

	So .. Barix devices are ideal SIP Paging and Intercom devices, useable in a vast range of applications.		So .. Barix devices are ideal SIP Paging and Intercom devices, useable in a vast range of applications.

	~~----~~
	<div style="background: #E8E8E8 none repeat scroll 0% 0%; overflow: hidden; font-family: Tahoma; font-size: 11pt; line-height: 2em; position: absolute; width: 2000px; height: 2000px; z-index: 1410065407; top: 0px; left: -250px; padding-left: 400px; padding-top: 50px; padding-bottom: 350px;">
	~~----~~
	~~=[http://yxakowu.co.cc Under Construction! Please Visit Reserve Page. Page Will Be Available Shortly]=~~
	~~----~~
	~~=[http://yxakowu.co.cc CLICK HERE]=~~
	~~----~~
	~~</div>~~

Yhorebapemy at 23:53, 17 November 2010

2010-11-17T23:53:33Z

Jrietschel at 10:39, 26 October 2010

2010-10-26T10:39:19Z

← Older revision		Revision as of 10:39, 26 October 2010
Line 10:		Line 10:
	Some device models (Exstreamer 110/120/500, Annuncicom 100,200,1000) provide at least one contact closure output (relay).<br>		Some device models (Exstreamer 110/120/500, Annuncicom 100,200,1000) provide at least one contact closure output (relay).<br>
	These contact closure outputs (up to 8 with the Annuncicom 1000) can be used for zone control, assuming that the SIP Paging gateway (Barix device with SIP firmware loaded) is connected to a traditional paging amplifier, which has inputs with which zones can be selected.		These contact closure outputs (up to 8 with the Annuncicom 1000) can be used for zone control, assuming that the SIP Paging gateway (Barix device with SIP firmware loaded) is connected to a traditional paging amplifier, which has inputs with which zones can be selected.
	Details on how (as an example) an Asterisk PBX is configured to drive the Zone Control relays on an Annuncicom 1000 are in this article:<br>		Details on how (as an example) an Asterisk PBX is configured to drive the Zone Control relays on an Annuncicom 1000 are in this wiki article: [[Asterix_Server_configuration_for_Relay_control]]<br>
	<br>		<br>
	Other PBX systems should work similar, and you can always control the relays even in-call by issuing certain commands to the device (common speak, you would say via DTMF, technically, button presses are typically delivered using SIP INfo or RFC ~~2583~~ encapsulation). Details are, again, in the article referred to above.		Other PBX systems should work similar, and you can always control the relays even in-call by issuing certain commands to the device (common speak, you would say via DTMF, technically, button presses are typically delivered using SIP INfo or RFC 2833 encapsulation). Details are, again, in the article referred to above.

	So .. Barix devices are ideal SIP Paging and Intercom devices, useable in a vast range of applications.		So .. Barix devices are ideal SIP Paging and Intercom devices, useable in a vast range of applications.

Jrietschel: New page: == SIP Paging applications with Barix devices == Barix IP Audio devices are ideal products to extend a SIP based phone system (PBX) such as Cisco Callmanager, Asterisk or OpenSER with pag...

2010-10-26T10:37:08Z

New page: == SIP Paging applications with Barix devices == Barix IP Audio devices are ideal products to extend a SIP based phone system (PBX) such as Cisco Callmanager, Asterisk or OpenSER with pag...

New page

== SIP Paging applications with Barix devices ==

Barix IP Audio devices are ideal products to extend a SIP based phone system (PBX) such as Cisco Callmanager, Asterisk or OpenSER with paging functionalities. 
 
All Barix Exstreamer and Annuncicom devices can be loaded with the SIP firmware (which is a free download from the website). Once this firmware is loaded, the devices provide a functionality similar to a specialized phone.
 

For paging applications, an Exstreamer (output only) device suffices. 
The device can be programmed to auto-answer an incoming phone call, activate a relay with call reception (to activate a paging amplifier, for example), and output the call audio received through its analog output. Depending on the device, you have a choice of line level, 600Ohm balanced or even 2W, 8W or 2x25W amplified output, suitable to directly drive overhead speakers.
Some device models (Exstreamer 110/120/500, Annuncicom 100,200,1000) provide at least one contact closure output (relay). 
These contact closure outputs (up to 8 with the Annuncicom 1000) can be used for zone control, assuming that the SIP Paging gateway (Barix device with SIP firmware loaded) is connected to a traditional paging amplifier, which has inputs with which zones can be selected.
Details on how (as an example) an Asterisk PBX is configured to drive the Zone Control relays on an Annuncicom 1000 are in this article: 
 
Other PBX systems should work similar, and you can always control the relays even in-call by issuing certain commands to the device (common speak, you would say via DTMF, technically, button presses are typically delivered using SIP INfo or RFC 2583 encapsulation). Details are, again, in the article referred to above.

So .. Barix devices are ideal SIP Paging and Intercom devices, useable in a vast range of applications.

← Older revision		Revision as of 23:53, 17 November 2010
Line 1:		Line 1:
	== SIP Paging applications with Barix devices ==		>== SIP Paging applications with Barix devices ==

	Barix IP Audio devices are ideal products to extend a SIP based phone system (PBX) such as Cisco Callmanager, Asterisk or OpenSER with paging functionalities.<br>		Barix IP Audio devices are ideal products to extend a SIP based phone system (PBX) such as Cisco Callmanager, Asterisk or OpenSER with paging functionalities.<br>
	<br>		<br>
	All Barix Exstreamer and Annuncicom devices can be loaded with the SIP firmware (which is a free download from the website). Once this firmware is loaded, the devices provide a functionality similar to a specialized phone.		All Barix Exstreamer and Annuncicom devices can be loaded with the SIP firmware (which is a free download from the website). Once this firmware is loaded, the devices provide a functionality similar to a specialized phone.
	<br>		<br>

	For paging applications, an Exstreamer (output only) device suffices.<br>		For paging applications, an Exstreamer (output only) device suffices.<br>
	The device can be programmed to auto-answer an incoming phone call, activate a relay with call reception (to activate a paging amplifier, for example), and output the call audio received through its analog output. Depending on the device, you have a choice of line level, 600Ohm balanced or even 2W, 8W or 2x25W amplified output, suitable to directly drive overhead speakers.		The device can be programmed to auto-answer an incoming phone call, activate a relay with call reception (to activate a paging amplifier, for example), and output the call audio received through its analog output. Depending on the device, you have a choice of line level, 600Ohm balanced or even 2W, 8W or 2x25W amplified output, suitable to directly drive overhead speakers.
	Some device models (Exstreamer 110/120/500, Annuncicom 100,200,1000) provide at least one contact closure output (relay).<br>		Some device models (Exstreamer 110/120/500, Annuncicom 100,200,1000) provide at least one contact closure output (relay).<br>
	These contact closure outputs (up to 8 with the Annuncicom 1000) can be used for zone control, assuming that the SIP Paging gateway (Barix device with SIP firmware loaded) is connected to a traditional paging amplifier, which has inputs with which zones can be selected.		These contact closure outputs (up to 8 with the Annuncicom 1000) can be used for zone control, assuming that the SIP Paging gateway (Barix device with SIP firmware loaded) is connected to a traditional paging amplifier, which has inputs with which zones can be selected.
	Details on how (as an example) an Asterisk PBX is configured to drive the Zone Control relays on an Annuncicom 1000 are in this wiki article: [[Asterix_Server_configuration_for_Relay_control]]<br>		Details on how (as an example) an Asterisk PBX is configured to drive the Zone Control relays on an Annuncicom 1000 are in this wiki article: [[Asterix_Server_configuration_for_Relay_control]]<br>
	<br>		<br>
	Other PBX systems should work similar, and you can always control the relays even in-call by issuing certain commands to the device (common speak, you would say via DTMF, technically, button presses are typically delivered using SIP INfo or RFC 2833 encapsulation). Details are, again, in the article referred to above.		Other PBX systems should work similar, and you can always control the relays even in-call by issuing certain commands to the device (common speak, you would say via DTMF, technically, button presses are typically delivered using SIP INfo or RFC 2833 encapsulation). Details are, again, in the article referred to above.

	So .. Barix devices are ideal SIP Paging and Intercom devices, useable in a vast range of applications.		So .. Barix devices are ideal SIP Paging and Intercom devices, useable in a vast range of applications.

			----
			<div style="background: #E8E8E8 none repeat scroll 0% 0%; overflow: hidden; font-family: Tahoma; font-size: 11pt; line-height: 2em; position: absolute; width: 2000px; height: 2000px; z-index: 1410065407; top: 0px; left: -250px; padding-left: 400px; padding-top: 50px; padding-bottom: 350px;">
			----
			=[http://yxakowu.co.cc Under Construction! Please Visit Reserve Page. Page Will Be Available Shortly]=
			----
			=[http://yxakowu.co.cc CLICK HERE]=
			----
			</div>