Green and Red LED - Revision history

Sandra at 13:05, 20 March 2009

2009-03-20T13:05:45Z

← Older revision		Revision as of 13:05, 20 March 2009
Line 1:		Line 1:

	'''Application is starting:'''		'''Application is starting:'''

Line 30:		Line 29:
	'''Device after production with bootloader but without MAC:'''		'''Device after production with bootloader but without MAC:'''
	The green and the red LED are blinking alternate. Indicates waiting for the factory test. During the factory test the blinking remains. If the test has been successful the red LED stops blinking. If the test fails the green LED stops blinking.		The green and the red LED are blinking alternate. Indicates waiting for the factory test. During the factory test the blinking remains. If the test has been successful the red LED stops blinking. If the test fails the green LED stops blinking.


			Back to [[FAQ]]

Andreas: Green & Red LED moved to Green and Red LED: '&' sign should not be used in title

2009-01-11T07:36:17Z

Green & Red LED moved to Green and Red LED: '&' sign should not be used in title

← Older revision	Revision as of 07:36, 11 January 2009
(No difference)

Sandra: /* Green and Red LED */

2009-01-07T23:19:16Z

Green and Red LED

@@ Line 1: / Line 1: @@
 '''Application is starting:'''
@@ Line 20: / Line 18: @@
 ** As sync slave the green LED blinks slow with green LED is blinking fast with breaks.
 ** On streaming receive the green LED blinks fast.

Sandra: /* Green and Red LED */

2009-01-07T23:16:50Z

Green and Red LED

Sandra: New page: == Green and Red LED == '''Application is starting:''' First the red goes on and the green LED blinks once. Then during the startup the green and red LEDs are blinking. During DHCP the ...

2009-01-07T23:15:38Z

New page: == Green and Red LED == '''Application is starting:''' First the red goes on and the green LED blinks once. Then during the startup the green and red LEDs are blinking. During DHCP the ...

New page

== Green and Red LED ==

'''Application is starting:'''

First the red goes on and the green LED blinks once.
Then during the startup the green and red LEDs are blinking. During DHCP the red LED is blinking always and the green LED is blinking alternate for five times and then pause for four times. After SonicIP the red will go off.
If the application is corrupt the red led is on and the green LED blinks five times. After that the device resets itself.
If the network hardware could not be initialized the red led is on and the green LED blinks three times. After that the device resets itself.
If the MAC address is corrupted the red led is on and the green LED blinks three times. After that the device resets itself.
If an IP address conflict occurs the red led is on and the green LED blinks five times. After that the device resets itself.
If on zServer is found the green LED blinks very slowly.

'''Application is running:'''

The red LED always is off.
On stop/pause the green LED is on.
During playing the green LED is blinking slowly.
On playing the gong or idle application the green LED is blinking fast with breaks.
As sync slave the green LED blinks slow with green LED is blinking fast with breaks.
On streaming receive the green LED blinks fast.

← Older revision		Revision as of 23:16, 7 January 2009
Line 4:		Line 4:
	'''Application is starting:'''		'''Application is starting:'''

	First the red goes on and the green LED blinks once.		** First the red goes on and the green LED blinks once.
	Then during the startup the green and red LEDs are blinking. During DHCP the red LED is blinking always and the green LED is blinking alternate for five times and then pause for four times. After SonicIP the red will go off.		** Then during the startup the green and red LEDs are blinking. During DHCP the red LED is blinking always and the green LED is blinking alternate for five times and then pause for four times. After SonicIP the red will go off.
	If the application is corrupt the red led is on and the green LED blinks five times. After that the device resets itself.		** If the application is corrupt the red led is on and the green LED blinks five times. After that the device resets itself.
	If the network hardware could not be initialized the red led is on and the green LED blinks three times. After that the device resets itself.		** If the network hardware could not be initialized the red led is on and the green LED blinks three times. After that the device resets itself.
	If the MAC address is corrupted the red led is on and the green LED blinks three times. After that the device resets itself.		** If the MAC address is corrupted the red led is on and the green LED blinks three times. After that the device resets itself.
	If an IP address conflict occurs the red led is on and the green LED blinks five times. After that the device resets itself.		** If an IP address conflict occurs the red led is on and the green LED blinks five times. After that the device resets itself.
	If on zServer is found the green LED blinks very slowly.		** If on zServer is found the green LED blinks very slowly.

	'''Application is running:'''		'''Application is running:'''

	The red LED always is off.		** The red LED always is off.
	On stop/pause the green LED is on.		** On stop/pause the green LED is on.
	During playing the green LED is blinking slowly.		** During playing the green LED is blinking slowly.
	On playing the gong or idle application the green LED is blinking fast with breaks.		** On playing the gong or idle application the green LED is blinking fast with breaks.
	As sync slave the green LED blinks slow with green LED is blinking fast with breaks.		** As sync slave the green LED blinks slow with green LED is blinking fast with breaks.
	On streaming receive the green LED blinks fast.		** On streaming receive the green LED blinks fast.