Barix Intercom System - Revision history

StefanG: /* Loading the software */

2013-04-19T11:21:34Z

Loading the software

← Older revision		Revision as of 11:21, 19 April 2013
Line 14:		Line 14:
	The other devices (Annuncicom 100, Exstreamer 100/200) must be loaded with the ABCL software.		The other devices (Annuncicom 100, Exstreamer 100/200) must be loaded with the ABCL software.

	Download the latest version of ABCL from the [http://www.barix.com/downloads~~.php?pid=21~~ Barix Website] and upload to the devices ~~using the~~ [[~~Firmware upload \| standard procedure~~]].		Download the latest version of ABCL from the [http://www.barix.com/downloads/ Barix Website] and upload to the devices [[FW Update]].

	== Preparing the installation ==		== Preparing the installation ==

StefanG: /* Requirements */

2013-04-19T11:12:26Z

Requirements

← Older revision		Revision as of 11:12, 19 April 2013
Line 6:		Line 6:
	You will need the following hardware:		You will need the following hardware:
	* one or more [[PS16]] stations		* one or more [[PS16]] stations
	* one or more ~~Annuncicoms~~ 100 or 200		* one or more [[Annuncicom 100]] or 200
	* for paging purposes (output only) ~~Exstreamers~~ 100/200 can be used in addition or instead of the Annuncicoms		* for paging purposes (output only) [[Exstreamer 100]]/200 can be used in addition or instead of the Annuncicoms


	== Loading the software ==		== Loading the software ==

StefanG: /* Keyboard */

2013-04-19T11:09:51Z

Keyboard

← Older revision		Revision as of 11:09, 19 April 2013
Line 91:		Line 91:
	=== Master ===		=== Master ===
	==== Keyboard ====		==== Keyboard ====
	The PS16 is controlled with a keyboard. The PS16 keys are identified according to the following convention:		The [[PS16]] is controlled with a keyboard. The PS16 keys are identified according to the following convention:
	* keys are numbered from 1 to 16, left to right, the bottom row first		* keys are numbered from 1 to 16, left to right, the bottom row first
	* the key in the lower left corner has the number 1		* the key in the lower left corner has the number 1

StefanG: /* Audio adjustment */

2013-04-12T16:45:30Z

Audio adjustment

← Older revision		Revision as of 16:45, 12 April 2013
Line 148:		Line 148:
	* gain on client/master		* gain on client/master
	* microphone sensitivity potentiometer on the side of the PS16 (with picture)		* microphone sensitivity potentiometer on the side of the PS16 (with picture)


			Back to [[FAQ]]

Brain: /* Audio adjustment */

2008-12-19T14:59:04Z

Audio adjustment

← Older revision		Revision as of 14:59, 19 December 2008
Line 147:		Line 147:
	=== Audio adjustment ===		=== Audio adjustment ===
	* gain on client/master		* gain on client/master
	* microphone sensitivity potentiometer on the side of the PS16		* microphone sensitivity potentiometer on the side of the PS16 (with picture)

Brain: /* Master */

2008-12-19T14:58:01Z

Master

← Older revision		Revision as of 14:58, 19 December 2008
Line 90:		Line 90:

	=== Master ===		=== Master ===
			==== Keyboard ====
			The PS16 is controlled with a keyboard. The PS16 keys are identified according to the following convention:
			* keys are numbered from 1 to 16, left to right, the bottom row first
			* the key in the lower left corner has the number 1
			* the key in the lower right corner has the number 8
			* the key in the upper left corner has the number 9
			* the key in the upper right corner has the number 16

			The following table displays the key assignment and function description:

			{\|border="1" cellpadding="5" cellspacing="0"
			\|-
			\|'''Key'''
			\|'''Function'''
			\|-
			\|Key 1
			\|accept an incoming call / hang-up current call
			\|-
			\|Key 2
			\|page all clients if no call is in progress (hold the key while talking)
			trigger the connected client's relay (door open) for 5 seconds if a call is in progress
			\|-
			\|Key 3
			\|cancel an incoming call/hang-up current call
			\|-
			\|Key 4
			\|enter unattended mode, (pressing any other key exits unattended mode)
			\|-
			\|Key 9
			\|decrease audio volume by 5%
			\|-
			\|Key 10
			\|increase audio volume by 5%
			\|-
			\|Key 11
			\|Press once: start recording unattended message.
			A second press stops the recording and saves the message for use.
			\|-
			\|}

			==== Unattended mode ====
			It is possible to set the master station into "Unattended" mode, here incoming
			calls from clients will have a pre-recorded 'unattended message' played to them
			and the call will then be terminated.

			'''NOTE:''' the master will automatically enter "Unattended" mode if an
			incoming call is not answered within the configured time period.

			An initial 'unattended message' must be recorded when the system
			is first being set up, otherwise calls will be hung up without
			explanation. The Key 11 is used to record the message, as described above.

	== Final tuning of the system ==		== Final tuning of the system ==

Brain at 14:46, 19 December 2008

2008-12-19T14:46:36Z

← Older revision		Revision as of 14:46, 19 December 2008
Line 92:		Line 92:


	== Audio adjustment ==		== Final tuning of the system ==
			By default all devices are configured to play the SonicIP at startup. When the system is set-up you will probably not need the SonicIP any more. Open the WEB UI of each device in your browser, disable the SonicIP in the '''Settings''' page and press '''Apply'''.

			=== Audio adjustment ===
	* gain on client/master		* gain on client/master
	* microphone sensitivity potentiometer on the side of the PS16		* microphone sensitivity potentiometer on the side of the PS16

Brain at 14:43, 19 December 2008

2008-12-19T14:43:54Z

@@ Line 33: / Line 33: @@
 === Ring tones ===
 == Configuring the clients ==
@@ Line 70: / Line 84: @@
 * Press '''Apply''' and wait until the unit reboots.

Brain at 14:35, 19 December 2008

2008-12-19T14:35:17Z

@@ Line 46: / Line 46: @@
 * Up to two master stations can be configured per client. Enter their IP address. Each input button on the Annuncicom 100/200 makes a call to one master.
-* If you want to use other audio format than the default select it in the '''Encoding''' field.
+* If you decided to use other audio format than the default select it in the '''Encoding''' field.
 == Configuring the PS16 ==
-Open the WEB UI of the PS16 in your browser and in the '''Application''' field select '''Intercom Master Station''', then press Apply.
+* Open the WEB UI of the PS16 in your browser and in the '''Application''' field select '''Intercom Master Station'''.

Brain at 14:26, 19 December 2008

2008-12-19T14:26:46Z

← Older revision		Revision as of 14:26, 19 December 2008
Line 25:		Line 25:

	Before setting up the system consider what network addresses to use for your units. Write down the address(es) of the master station(s).		Before setting up the system consider what network addresses to use for your units. Write down the address(es) of the master station(s).


	=== Device IDs ===		=== Device IDs ===