https://wiki.barix.com/api.php?action=feedcontributions&feedformat=atom&user=EliasBarix Wiki - User contributions [en]2026-04-25T17:27:43ZUser contributionsMediaWiki 1.37.1https://wiki.barix.com/index.php?title=SoundScape_-_IT_Network_Requirements&diff=4708SoundScape - IT Network Requirements2017-12-07T09:14:59Z<p>Elias: /* SoundScape - IT Network Requirements */</p>
<hr />
<div>== SoundScape - IT Network Requirements ==<br />
<br />
Before connecting the devices to the retailer's network, it would be better to check the next list:<br />
<br />
* Share with the administrator of the network the MAC of the SoundScape devices that you are planning to install. <br />
* Ask for a Static IP (one for each device). Also ask for the network settings: Netmask, Gateway and Primary DNS. Apply the setting on your SoundScape devices.<br />
* To connect the devices to the network you will need to plug a standard network cable into the network port of the Exstreamer (RJ45 Ethernet socket)<br />
<br />
It is also important to open the following ports for outgoing traffic of each Static IP/MAC: <br />
* HTTP, port 80, to allow the device contacting the Soundscape portal for normal operations and download. The audio tracks are encrypted. <br />
* HTTPS, port 443, to allow the device contacting the Soundscape portal for special information.<br />
* NTP, port 123, as the device needs to be able to reach an NTP server. The network needs to allow traffic through port 123 which is the port used by the NTP service that can sync the time from a reference NTP server in the network.<br />
<br />
<br />
<br />
Back to [[SoundScape]] <br><br />
Back to [[SoundScape - FAQ]]</div>Eliashttps://wiki.barix.com/index.php?title=SoundScape_-_IT_Network_Requirements&diff=4707SoundScape - IT Network Requirements2017-12-07T09:14:11Z<p>Elias: /* SoundScape - IT Network Requirements */</p>
<hr />
<div>== SoundScape - IT Network Requirements ==<br />
<br />
Before connecting the devices to the retailer's network, it would be better to check the next list:<br />
<br />
* Share with the administrator of the network the MAC of the SoundScape devices that you are planning to install. <br />
* Ask for a Static IP (one for each device). Also ask for the network settings: Netmask, Gateway and Primary DNS. Apply the setting on your SoundScape devices.<br />
* To connect the devices to the network you will need to plug a standard network cable into the network port of the Exstreamer (RJ45 Ethernet socket)<br />
<br />
It is also important to open the following ports for outgoing traffic of each Static IP/MAC: <br />
* HTTP, port 80, to allow the device contacting the Soundscape portal for normal operations and download. The audio tracks are already encrypted. <br />
* HTTPS, port 443, to allow the device contacting the Soundscape portal for special information.<br />
* NTP, port 123, as the device needs to be able to reach an NTP server. The network needs to allow traffic through port 123 which is the port used by the NTP service that can sync the time from a reference NTP server in the network.<br />
<br />
<br />
<br />
Back to [[SoundScape]] <br><br />
Back to [[SoundScape - FAQ]]</div>Eliashttps://wiki.barix.com/index.php?title=Barionet_1xxx&diff=4706Barionet 1xxx2017-08-07T14:38:06Z<p>Elias: /* How To's */</p>
<hr />
<div>=How To's=<br />
'''Barionet 1000'''<br><br />
• [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_an_access_point.pdf How to configure as an access point] <br><br />
• [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_Wi-Fi_client.pdf How to configure as Wi-Fi client ] <br><br />
• [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_enable_SLAAC.pdf How to enable SLAAC]<br />
<br><br />
<br><br />
Back to [[Main Page#Products]]</div>Eliashttps://wiki.barix.com/index.php?title=Barionet_1xxx&diff=4705Barionet 1xxx2017-08-07T14:37:57Z<p>Elias: /* How To's */</p>
<hr />
<div>=How To's=<br />
'''Barionet 1000'''<br><br />
• External link: [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_an_access_point.pdf How to configure as an access point] <br><br />
• [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_Wi-Fi_client.pdf How to configure as Wi-Fi client ] <br><br />
• [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_enable_SLAAC.pdf How to enable SLAAC]<br />
<br><br />
<br><br />
Back to [[Main Page#Products]]</div>Eliashttps://wiki.barix.com/index.php?title=Barionet_1xxx&diff=4704Barionet 1xxx2017-08-07T14:37:46Z<p>Elias: /* How To's */</p>
<hr />
<div>=How To's=<br />
'''Barionet 1000'''<br><br />
• External link:[https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_an_access_point.pdf How to configure as an access point] <br><br />
• [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_Wi-Fi_client.pdf How to configure as Wi-Fi client ] <br><br />
• [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_enable_SLAAC.pdf How to enable SLAAC]<br />
<br><br />
<br><br />
Back to [[Main Page#Products]]</div>Eliashttps://wiki.barix.com/index.php?title=Barionet_1xxx&diff=4703Barionet 1xxx2017-08-07T14:35:16Z<p>Elias: /* How To's */</p>
<hr />
<div>=How To's=<br />
'''Barionet 1000'''<br><br />
• [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_an_access_point.pdf How to configure as an access point] <br><br />
• [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_Wi-Fi_client.pdf How to configure as Wi-Fi client ] <br><br />
• [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_enable_SLAAC.pdf How to enable SLAAC]<br />
<br><br />
<br><br />
Back to [[Main Page#Products]]</div>Eliashttps://wiki.barix.com/index.php?title=Barionet_1xxx&diff=4702Barionet 1xxx2017-08-07T14:34:36Z<p>Elias: /* How To's */</p>
<hr />
<div>=How To's=<br />
'''Barionet 1000'''<br><br />
•<br />
[https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_an_access_point.pdf How to configure as an access point] <br><br />
• How to configure as Wi-Fi client [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_Wi-Fi_client.pdf] <br><br />
• How to enable SLAAC [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_enable_SLAAC.pdf]<br />
<br><br />
<br><br />
Back to [[Main Page#Products]]</div>Eliashttps://wiki.barix.com/index.php?title=Barionet_1xxx&diff=4701Barionet 1xxx2017-08-07T14:33:56Z<p>Elias: /* How To's */</p>
<hr />
<div>=How To's=<br />
'''Barionet 1000'''<br><br />
• How to configure as an access point<br />
[https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_an_access_point.pdf link] <br><br />
• How to configure as Wi-Fi client [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_Wi-Fi_client.pdf] <br><br />
• How to enable SLAAC [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_enable_SLAAC.pdf]<br />
<br><br />
<br><br />
Back to [[Main Page#Products]]</div>Eliashttps://wiki.barix.com/index.php?title=Barionet_1xxx&diff=4700Barionet 1xxx2017-08-07T14:33:39Z<p>Elias: /* How To's */</p>
<hr />
<div>=How To's=<br />
'''Barionet 1000'''<br><br />
• How to configure as an access point<br />
[https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_an_access_point.pdf Link] <br><br />
• How to configure as Wi-Fi client [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_Wi-Fi_client.pdf] <br><br />
• How to enable SLAAC [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_enable_SLAAC.pdf]<br />
<br><br />
<br><br />
Back to [[Main Page#Products]]</div>Eliashttps://wiki.barix.com/index.php?title=Barionet_1xxx&diff=4699Barionet 1xxx2017-08-07T14:33:09Z<p>Elias: /* How To's */</p>
<hr />
<div>=How To's=<br />
'''Barionet 1000'''<br><br />
• How to configure as an access point<br />
[https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_an_access_point.pdf<br />
link] <br><br />
• How to configure as Wi-Fi client [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_Wi-Fi_client.pdf] <br><br />
• How to enable SLAAC [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_enable_SLAAC.pdf]<br />
<br><br />
<br><br />
Back to [[Main Page#Products]]</div>Eliashttps://wiki.barix.com/index.php?title=Barionet_1xxx&diff=4698Barionet 1xxx2017-08-07T14:30:50Z<p>Elias: /* How To's */</p>
<hr />
<div>=How To's=<br />
'''Barionet 1000'''<br><br />
• How to configure as an access point<br />
[https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_an_access_point.pdf] <br><br />
• How to configure as Wi-Fi client [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_Wi-Fi_client.pdf] <br><br />
• How to enable SLAAC [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_enable_SLAAC.pdf]<br />
<br><br />
<br><br />
Back to [[Main Page#Products]]</div>Eliashttps://wiki.barix.com/index.php?title=Barionet_1xxx&diff=4697Barionet 1xxx2017-08-07T14:29:23Z<p>Elias: </p>
<hr />
<div>=How To's=<br />
'''Barionet 1000'''<br><br />
• How to configure as an access point<br />
[https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_an_access_point.pdf] <br><a href="#" target="_blank">https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_an_access_point.pdf</a><br />
• How to configure as Wi-Fi client [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_Wi-Fi_client.pdf] <br><br />
• How to enable SLAAC [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_enable_SLAAC.pdf]<br />
<br><br />
<br><br />
Back to [[Main Page#Products]]</div>Eliashttps://wiki.barix.com/index.php?title=Barionet_1xxx&diff=4696Barionet 1xxx2017-08-07T14:13:09Z<p>Elias: /* How To's */</p>
<hr />
<div>=How To's=<br />
'''Barionet 1000'''<br><br />
• How to configure as an access point<br />
[https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_an_access_point.pdf] <br><br />
• How to configure as Wi-Fi client [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_Wi-Fi_client.pdf] <br><br />
• How to enable SLAAC [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_enable_SLAAC.pdf]<br />
<br><br />
<br><br />
Back to [[Main Page#Products]]</div>Eliashttps://wiki.barix.com/index.php?title=Barionet_1xxx&diff=4695Barionet 1xxx2017-08-07T14:12:40Z<p>Elias: </p>
<hr />
<div>=How To's=<br />
'''Barionet 1000'''<br><br />
• How to configure as an access point<br />
[[https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_an_access_point.pdf]] <br><br />
• How to configure as Wi-Fi client [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_Wi-Fi_client.pdf] <br><br />
• How to enable SLAAC [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_enable_SLAAC.pdf]<br />
<br><br />
<br><br />
Back to [[Main Page#Products]]</div>Eliashttps://wiki.barix.com/index.php?title=Barionet_1xxx&diff=4694Barionet 1xxx2017-08-07T14:11:55Z<p>Elias: /* How To's */</p>
<hr />
<div>=How To's=<br />
'''Barionet 1000'''<br><br />
• How to configure as an access point<br />
[https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_an_access_point.pdf] <br><br />
• How to configure as Wi-Fi client [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_Wi-Fi_client.pdf] <br><br />
• How to enable SLAAC [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_enable_SLAAC.pdf]<br />
<br><br />
<br><br />
Back to [[Main Page#Products]]</div>Eliashttps://wiki.barix.com/index.php?title=Barionet_1xxx&diff=4693Barionet 1xxx2017-08-07T14:11:29Z<p>Elias: /* How To's */</p>
<hr />
<div>=How To's=<br />
'''Barionet 1000'''<br><br />
• How to configure as an access point<br />
[https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_an_access_point.pdf] <br><br />
• How to configure as Wi-Fi client [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_Wi-Fi_client.pdf] <br><br />
• How to enable SLAAC [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_enable_SLAAC.pdf]<br />
<br><br />
<br><br />
Back to [[Main Page#Products]]<br />
--[[User:Elias|Elias]] 14:11, 7 August 2017 (UTC)</div>Eliashttps://wiki.barix.com/index.php?title=Barionet_1xxx&diff=4692Barionet 1xxx2017-08-07T14:10:56Z<p>Elias: </p>
<hr />
<div>=How To's=<br />
'''Barionet 1000'''<br><br />
• How to configure as an access point<br />
"[https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_an_access_point.pdf]" <br><br />
• How to configure as Wi-Fi client [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_Wi-Fi_client.pdf] <br><br />
• How to enable SLAAC [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_enable_SLAAC.pdf]<br />
<br><br />
<br><br />
Back to [[Main Page#Products]]</div>Eliashttps://wiki.barix.com/index.php?title=Barionet_1xxx&diff=4691Barionet 1xxx2017-08-07T14:10:31Z<p>Elias: </p>
<hr />
<div>=How To's=<br />
'''Barionet 1000'''<br><br />
• How to configure as an access point<br />
["https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_an_access_point.pdf"] <br><br />
• How to configure as Wi-Fi client [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_Wi-Fi_client.pdf] <br><br />
• How to enable SLAAC [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_enable_SLAAC.pdf]<br />
<br><br />
<br><br />
Back to [[Main Page#Products]]</div>Eliashttps://wiki.barix.com/index.php?title=Barionet_1xxx&diff=4690Barionet 1xxx2017-08-07T13:45:50Z<p>Elias: /* How to's */</p>
<hr />
<div>=How To's=<br />
'''Barionet 1000'''<br><br />
• How to configure as an access point [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_an_access_point.pdf] <br><br />
• How to configure as Wi-Fi client [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_Wi-Fi_client.pdf] <br><br />
• How to enable SLAAC [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_enable_SLAAC.pdf]<br />
<br><br />
<br><br />
Back to [[Main Page#Products]]</div>Eliashttps://wiki.barix.com/index.php?title=Barionet_1xxx&diff=4689Barionet 1xxx2017-08-07T13:44:04Z<p>Elias: /* Barionet 1000 */</p>
<hr />
<div>=How to's=<br />
'''Barionet 1000'''<br><br />
• How to configure as an access point [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_an_access_point.pdf] <br><br />
• How to configure as Wi-Fi client [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_Wi-Fi_client.pdf] <br><br />
• How to enable SLAAC [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_enable_SLAAC.pdf]<br />
<br><br />
<br><br />
Back to [[Main Page#Products]]</div>Eliashttps://wiki.barix.com/index.php?title=Barionet_1xxx&diff=4688Barionet 1xxx2017-08-07T13:43:20Z<p>Elias: /* How to's */</p>
<hr />
<div>=How to's=<br />
==Barionet 1000==<br />
• How to configure as an access point [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_an_access_point.pdf] <br><br />
• How to configure as Wi-Fi client [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_Wi-Fi_client.pdf] <br><br />
• How to enable SLAAC [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_enable_SLAAC.pdf]<br />
<br><br />
<br><br />
Back to [[Main Page#Products]]</div>Eliashttps://wiki.barix.com/index.php?title=Barionet_1xxx&diff=4687Barionet 1xxx2017-08-07T13:42:13Z<p>Elias: </p>
<hr />
<div>=How to's=<br />
• How to configure as an access point [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_an_access_point.pdf] <br><br />
• How to configure as Wi-Fi client [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_Wi-Fi_client.pdf] <br><br />
• How to enable SLAAC [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_enable_SLAAC.pdf]<br />
<br><br />
<br><br />
Back to [[Main Page#Products]]</div>Eliashttps://wiki.barix.com/index.php?title=Barionet_1xxx&diff=4686Barionet 1xxx2017-08-07T13:41:49Z<p>Elias: /* How to's */</p>
<hr />
<div>[[Image:Csm_Barionet_1000_27fd3073ca.png|200px|thumb|right]]<br />
[[Image:Imagem_barionet.png|200px|thumb|right]]<br />
<br />
=How to's=<br />
• How to configure as an access point [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_an_access_point.pdf] <br><br />
• How to configure as Wi-Fi client [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_Wi-Fi_client.pdf] <br><br />
• How to enable SLAAC [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_enable_SLAAC.pdf]<br />
<br><br />
<br><br />
Back to [[Main Page#Products]]</div>Eliashttps://wiki.barix.com/index.php?title=Barionet_1xxx&diff=4685Barionet 1xxx2017-08-07T13:39:02Z<p>Elias: /* Howto's */</p>
<hr />
<div>=How to's=<br />
• How to configure as an access point [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_an_access_point.pdf] <br><br />
• How to configure as Wi-Fi client [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_Wi-Fi_client.pdf] <br><br />
• How to enable SLAAC [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_enable_SLAAC.pdf]<br />
<br><br />
<br><br />
Back to [[Main Page#Products]]</div>Eliashttps://wiki.barix.com/index.php?title=Barionet_1xxx&diff=4684Barionet 1xxx2017-08-07T13:38:19Z<p>Elias: </p>
<hr />
<div>=Howto's=<br />
• How to configure as an access point <br>[https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_an_access_point.pdf]<br />
• How to configure as Wi-Fi client <br>[https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_Wi-Fi_client.pdf]<br />
• How to enable SLAAC <br>[https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_enable_SLAAC.pdf]<br />
<br><br />
Back to [[Main Page#Products]]</div>Eliashttps://wiki.barix.com/index.php?title=Barionet_1xxx&diff=4683Barionet 1xxx2017-08-07T13:34:58Z<p>Elias: </p>
<hr />
<div>How to configure as an access point [https://www.barix.com/fileadmin/data/howto/Barionet1000_HowTo_configure_as_an_access_point.pdf]</div>Eliashttps://wiki.barix.com/index.php?title=Barionet_1xxx&diff=4682Barionet 1xxx2017-07-11T14:19:09Z<p>Elias: Removing all content from page</p>
<hr />
<div></div>Eliashttps://wiki.barix.com/index.php?title=Barionet_1xxx&diff=4681Barionet 1xxx2017-07-11T14:18:47Z<p>Elias: </p>
<hr />
<div><html><br />
<br />
<head><br />
<meta http-equiv=Content-Type content="text/html; charset=unicode"><br />
<meta name=Generator content="Microsoft Word 15 (filtered)"><br />
<title>Configuring the Barix Barionet 1000 as an access point</title><br />
<style><br />
<!--<br />
@media print {<br />
#main {<br />
padding-bottom: 1em !important; /* The default padding of 6em is too much for printouts */<br />
}<br />
<br />
body {<br />
font-family: Arial, Helvetica, FreeSans, sans-serif;<br />
font-size: 10pt;<br />
line-height: 1.2;<br />
}<br />
<br />
body, #full-height-container, #main, #page, #content, .has-personal-sidebar #content {<br />
background: #fff !important;<br />
color: #000 !important;<br />
border: 0 !important;<br />
width: 100% !important;<br />
height: auto !important;<br />
min-height: auto !important;<br />
margin: 0 !important;<br />
padding: 0 !important;<br />
display: block !important;<br />
}<br />
<br />
a, a:link, a:visited, a:focus, a:hover, a:active {<br />
color: #000;<br />
}<br />
<br />
#content h1,<br />
#content h2,<br />
#content h3,<br />
#content h4,<br />
#content h5,<br />
#content h6 {<br />
font-family: Arial, Helvetica, FreeSans, sans-serif;<br />
page-break-after: avoid;<br />
}<br />
<br />
pre {<br />
font-family: Monaco, "Courier New", monospace;<br />
}<br />
<br />
#header,<br />
.aui-header-inner,<br />
#navigation,<br />
#sidebar,<br />
.sidebar,<br />
#personal-info-sidebar,<br />
.ia-fixed-sidebar,<br />
.page-actions,<br />
.navmenu,<br />
.ajs-menu-bar,<br />
.noprint,<br />
.inline-control-link,<br />
.inline-control-link a,<br />
a.show-labels-editor,<br />
.global-comment-actions,<br />
.comment-actions,<br />
.quick-comment-container,<br />
#addcomment {<br />
display: none !important;<br />
}<br />
<br />
/* CONF-28544 cannot print multiple pages in IE */<br />
#splitter-content {<br />
position: relative !important;<br />
}<br />
<br />
.comment .date::before {<br />
content: none !important; /* remove middot for print view */<br />
}<br />
<br />
h1.pagetitle img {<br />
height: auto;<br />
width: auto;<br />
}<br />
<br />
.print-only {<br />
display: block;<br />
}<br />
<br />
#footer {<br />
position: relative !important; /* CONF-17506 Place the footer at end of the content */<br />
margin: 0;<br />
padding: 0;<br />
background: none;<br />
clear: both;<br />
}<br />
<br />
#poweredby {<br />
border-top: none;<br />
background: none;<br />
}<br />
<br />
#poweredby li.print-only {<br />
display: list-item;<br />
font-style: italic;<br />
}<br />
<br />
#poweredby li.noprint {<br />
display: none;<br />
}<br />
<br />
/* no width controls in print */<br />
.wiki-content .table-wrap,<br />
.wiki-content p,<br />
.panel .codeContent,<br />
.panel .codeContent pre,<br />
.image-wrap {<br />
overflow: visible !important;<br />
}<br />
<br />
/* TODO - should this work? */<br />
#children-section,<br />
#comments-section .comment,<br />
#comments-section .comment .comment-body,<br />
#comments-section .comment .comment-content,<br />
#comments-section .comment p {<br />
page-break-inside: avoid;<br />
}<br />
<br />
#page-children a {<br />
text-decoration: none;<br />
}<br />
<br />
/**<br />
hide twixies<br />
<br />
the specificity here is a hack because print styles<br />
are getting loaded before the base styles. */<br />
#comments-section.pageSection .section-header,<br />
#comments-section.pageSection .section-title,<br />
#children-section.pageSection .section-header,<br />
#children-section.pageSection .section-title,<br />
.children-show-hide {<br />
padding-left: 0;<br />
margin-left: 0;<br />
}<br />
<br />
.children-show-hide.icon {<br />
display: none;<br />
}<br />
<br />
/* personal sidebar */<br />
.has-personal-sidebar #content {<br />
margin-right: 0px;<br />
}<br />
<br />
.has-personal-sidebar #content .pageSection {<br />
margin-right: 0px;<br />
}<br />
<br />
.no-print, .no-print * {<br />
display: none !important;<br />
}<br />
}<br />
<br />
/* Font Definitions */<br />
@font-face<br />
{font-family:"Cambria Math";<br />
panose-1:2 4 5 3 5 4 6 3 2 4;}<br />
/* Style Definitions */<br />
p.MsoNormal, li.MsoNormal, div.MsoNormal<br />
{margin:0in;<br />
margin-bottom:.0001pt;<br />
font-size:12.0pt;<br />
font-family:"Times New Roman",serif;}<br />
h1<br />
{mso-style-link:"Heading 1 Char";<br />
margin-right:0in;<br />
margin-left:0in;<br />
font-size:24.0pt;<br />
font-family:"Times New Roman",serif;<br />
font-weight:bold;}<br />
p<br />
{margin-right:0in;<br />
margin-left:0in;<br />
font-size:12.0pt;<br />
font-family:"Times New Roman",serif;}<br />
p.msonormal0, li.msonormal0, div.msonormal0<br />
{mso-style-name:msonormal;<br />
margin-right:0in;<br />
margin-left:0in;<br />
font-size:12.0pt;<br />
font-family:"Times New Roman",serif;}<br />
span.Heading1Char<br />
{mso-style-name:"Heading 1 Char";<br />
mso-style-link:"Heading 1";<br />
font-family:"Calibri Light",sans-serif;<br />
color:#2F5496;}<br />
.MsoChpDefault<br />
{font-size:10.0pt;}<br />
@page WordSection1<br />
{size:8.5in 11.0in;<br />
margin:1.0in 1.0in 1.0in 1.0in;}<br />
div.WordSection1<br />
{page:WordSection1;}<br />
--><br />
</style><br />
<br />
</head><br />
<br />
<body lang=EN-US><br />
<br />
<div class=WordSection1><br />
<br />
<h1>Configuring the Barix Barionet 1000 as an access point</h1><br />
<br />
<p>&nbsp;</p><br />
<br />
<p>First, we need to Configure the LAN IP:</p><br />
<br />
<p><img width=1209 height=759 id="Picture 8"<br />
src="bari1.png"></p><br />
<br />
<p>Then, we need to delete the WLAN IP.</p><br />
<br />
<p>You should get a similar image after deletion of the WLAN:</p><br />
<br />
<p><img width=1343 height=735 id="Picture 7"<br />
src="Configuring+the+Barix+Barionet+1000+as+an+access+point_files/image002.png"></p><br />
<br />
<p>&nbsp;</p><br />
<br />
<p>and then, associate this to the LAN:</p><br />
<br />
<p><img<br />
src="http://jira.qiba.ch/secure/attachment/14037/14037_image-2017-03-27-10-07-37-664.png"<br />
alt="http://jira.qiba.ch/secure/attachment/14037/14037_image-2017-03-27-10-07-37-664.png">&nbsp;</p><br />
<br />
<p>&nbsp;</p><br />
<br />
<p>and&nbsp;</p><br />
<br />
<p>&nbsp;</p><br />
<br />
<p>&nbsp;<img<br />
src="http://jira.qiba.ch/secure/attachment/14036/14036_image-2017-03-27-10-05-44-181.png"<br />
alt="http://jira.qiba.ch/secure/attachment/14036/14036_image-2017-03-27-10-05-44-181.png"></p><br />
<br />
<p>&nbsp;</p><br />
<br />
<p>After doing Save and apply you should get:</p><br />
<br />
<p><img<br />
src="http://jira.qiba.ch/secure/attachment/14040/14040_image-2017-03-27-10-15-32-805.png"<br />
alt="http://jira.qiba.ch/secure/attachment/14040/14040_image-2017-03-27-10-15-32-805.png"></p><br />
<br />
<p>&nbsp;</p><br />
<br />
<p>&nbsp;</p><br />
<br />
<p>&nbsp;</p><br />
<br />
</div><br />
<br />
</body><br />
<br />
</html></div>Eliashttps://wiki.barix.com/index.php?title=Barionet_1xxx&diff=4680Barionet 1xxx2017-07-11T14:17:54Z<p>Elias: </p>
<hr />
<div><html><br />
<br />
<head><br />
<meta http-equiv=Content-Type content="text/html; charset=unicode"><br />
<meta name=Generator content="Microsoft Word 15 (filtered)"><br />
<title>Configuring the Barix Barionet 1000 as an access point</title><br />
<style><br />
<!--<br />
@media print {<br />
#main {<br />
padding-bottom: 1em !important; /* The default padding of 6em is too much for printouts */<br />
}<br />
<br />
body {<br />
font-family: Arial, Helvetica, FreeSans, sans-serif;<br />
font-size: 10pt;<br />
line-height: 1.2;<br />
}<br />
<br />
body, #full-height-container, #main, #page, #content, .has-personal-sidebar #content {<br />
background: #fff !important;<br />
color: #000 !important;<br />
border: 0 !important;<br />
width: 100% !important;<br />
height: auto !important;<br />
min-height: auto !important;<br />
margin: 0 !important;<br />
padding: 0 !important;<br />
display: block !important;<br />
}<br />
<br />
a, a:link, a:visited, a:focus, a:hover, a:active {<br />
color: #000;<br />
}<br />
<br />
#content h1,<br />
#content h2,<br />
#content h3,<br />
#content h4,<br />
#content h5,<br />
#content h6 {<br />
font-family: Arial, Helvetica, FreeSans, sans-serif;<br />
page-break-after: avoid;<br />
}<br />
<br />
pre {<br />
font-family: Monaco, "Courier New", monospace;<br />
}<br />
<br />
#header,<br />
.aui-header-inner,<br />
#navigation,<br />
#sidebar,<br />
.sidebar,<br />
#personal-info-sidebar,<br />
.ia-fixed-sidebar,<br />
.page-actions,<br />
.navmenu,<br />
.ajs-menu-bar,<br />
.noprint,<br />
.inline-control-link,<br />
.inline-control-link a,<br />
a.show-labels-editor,<br />
.global-comment-actions,<br />
.comment-actions,<br />
.quick-comment-container,<br />
#addcomment {<br />
display: none !important;<br />
}<br />
<br />
/* CONF-28544 cannot print multiple pages in IE */<br />
#splitter-content {<br />
position: relative !important;<br />
}<br />
<br />
.comment .date::before {<br />
content: none !important; /* remove middot for print view */<br />
}<br />
<br />
h1.pagetitle img {<br />
height: auto;<br />
width: auto;<br />
}<br />
<br />
.print-only {<br />
display: block;<br />
}<br />
<br />
#footer {<br />
position: relative !important; /* CONF-17506 Place the footer at end of the content */<br />
margin: 0;<br />
padding: 0;<br />
background: none;<br />
clear: both;<br />
}<br />
<br />
#poweredby {<br />
border-top: none;<br />
background: none;<br />
}<br />
<br />
#poweredby li.print-only {<br />
display: list-item;<br />
font-style: italic;<br />
}<br />
<br />
#poweredby li.noprint {<br />
display: none;<br />
}<br />
<br />
/* no width controls in print */<br />
.wiki-content .table-wrap,<br />
.wiki-content p,<br />
.panel .codeContent,<br />
.panel .codeContent pre,<br />
.image-wrap {<br />
overflow: visible !important;<br />
}<br />
<br />
/* TODO - should this work? */<br />
#children-section,<br />
#comments-section .comment,<br />
#comments-section .comment .comment-body,<br />
#comments-section .comment .comment-content,<br />
#comments-section .comment p {<br />
page-break-inside: avoid;<br />
}<br />
<br />
#page-children a {<br />
text-decoration: none;<br />
}<br />
<br />
/**<br />
hide twixies<br />
<br />
the specificity here is a hack because print styles<br />
are getting loaded before the base styles. */<br />
#comments-section.pageSection .section-header,<br />
#comments-section.pageSection .section-title,<br />
#children-section.pageSection .section-header,<br />
#children-section.pageSection .section-title,<br />
.children-show-hide {<br />
padding-left: 0;<br />
margin-left: 0;<br />
}<br />
<br />
.children-show-hide.icon {<br />
display: none;<br />
}<br />
<br />
/* personal sidebar */<br />
.has-personal-sidebar #content {<br />
margin-right: 0px;<br />
}<br />
<br />
.has-personal-sidebar #content .pageSection {<br />
margin-right: 0px;<br />
}<br />
<br />
.no-print, .no-print * {<br />
display: none !important;<br />
}<br />
}<br />
<br />
/* Font Definitions */<br />
@font-face<br />
{font-family:"Cambria Math";<br />
panose-1:2 4 5 3 5 4 6 3 2 4;}<br />
/* Style Definitions */<br />
p.MsoNormal, li.MsoNormal, div.MsoNormal<br />
{margin:0in;<br />
margin-bottom:.0001pt;<br />
font-size:12.0pt;<br />
font-family:"Times New Roman",serif;}<br />
h1<br />
{mso-style-link:"Heading 1 Char";<br />
margin-right:0in;<br />
margin-left:0in;<br />
font-size:24.0pt;<br />
font-family:"Times New Roman",serif;<br />
font-weight:bold;}<br />
p<br />
{margin-right:0in;<br />
margin-left:0in;<br />
font-size:12.0pt;<br />
font-family:"Times New Roman",serif;}<br />
p.msonormal0, li.msonormal0, div.msonormal0<br />
{mso-style-name:msonormal;<br />
margin-right:0in;<br />
margin-left:0in;<br />
font-size:12.0pt;<br />
font-family:"Times New Roman",serif;}<br />
span.Heading1Char<br />
{mso-style-name:"Heading 1 Char";<br />
mso-style-link:"Heading 1";<br />
font-family:"Calibri Light",sans-serif;<br />
color:#2F5496;}<br />
.MsoChpDefault<br />
{font-size:10.0pt;}<br />
@page WordSection1<br />
{size:8.5in 11.0in;<br />
margin:1.0in 1.0in 1.0in 1.0in;}<br />
div.WordSection1<br />
{page:WordSection1;}<br />
--><br />
</style><br />
<br />
</head><br />
<br />
<body lang=EN-US><br />
<br />
<div class=WordSection1><br />
<br />
<h1>Configuring the Barix Barionet 1000 as an access point</h1><br />
<br />
<p>&nbsp;</p><br />
<br />
<p>First, we need to Configure the LAN IP:</p><br />
<br />
<p><img width=1209 height=759 id="Picture 8"<br />
src="Configuring+the+Barix+Barionet+1000+as+an+access+point_files/image001.png"></p><br />
<br />
<p>Then, we need to delete the WLAN IP.</p><br />
<br />
<p>You should get a similar image after deletion of the WLAN:</p><br />
<br />
<p><img width=1343 height=735 id="Picture 7"<br />
src="Configuring+the+Barix+Barionet+1000+as+an+access+point_files/image002.png"></p><br />
<br />
<p>&nbsp;</p><br />
<br />
<p>and then, associate this to the LAN:</p><br />
<br />
<p><img<br />
src="http://jira.qiba.ch/secure/attachment/14037/14037_image-2017-03-27-10-07-37-664.png"<br />
alt="http://jira.qiba.ch/secure/attachment/14037/14037_image-2017-03-27-10-07-37-664.png">&nbsp;</p><br />
<br />
<p>&nbsp;</p><br />
<br />
<p>and&nbsp;</p><br />
<br />
<p>&nbsp;</p><br />
<br />
<p>&nbsp;<img<br />
src="http://jira.qiba.ch/secure/attachment/14036/14036_image-2017-03-27-10-05-44-181.png"<br />
alt="http://jira.qiba.ch/secure/attachment/14036/14036_image-2017-03-27-10-05-44-181.png"></p><br />
<br />
<p>&nbsp;</p><br />
<br />
<p>After doing Save and apply you should get:</p><br />
<br />
<p><img<br />
src="http://jira.qiba.ch/secure/attachment/14040/14040_image-2017-03-27-10-15-32-805.png"<br />
alt="http://jira.qiba.ch/secure/attachment/14040/14040_image-2017-03-27-10-15-32-805.png"></p><br />
<br />
<p>&nbsp;</p><br />
<br />
<p>&nbsp;</p><br />
<br />
<p>&nbsp;</p><br />
<br />
</div><br />
<br />
</body><br />
<br />
</html></div>Eliashttps://wiki.barix.com/index.php?title=Barionet_1xxx&diff=4679Barionet 1xxx2017-07-11T14:09:01Z<p>Elias: /* HowTo */</p>
<hr />
<div>==Configuring the Barix Barionet 1000 as an access point==</div>Eliashttps://wiki.barix.com/index.php?title=Barionet_1xxx&diff=4678Barionet 1xxx2017-07-11T14:08:20Z<p>Elias: /* HowTo */</p>
<hr />
<div>==Configuring the Barix Barionet 1000 as an access point==<br />
===HowTo===<br />
[[Image:Bari1.png|50px|thumb|right]]<br />
[[Image:Bari2.png|50px|thumb|right]]<br />
[[Image:Bari3.png|50px|thumb|right]]<br />
[[Image:Bari4.png|50px|thumb|right]]<br />
[[Image:Bari5.png|50px|thumb|right]]<br />
1) First, we need to Configure the LAN IP<br><br />
[[Image:Bari1.png|50px|thumb|right]]<br><br />
2) Then, we need to delete the WLAN IP. You should get a similar image after deletion of the WLAN<br><br />
3) Associate this to the LAN<br><br />
4) Make sure to check the LAN field<br><br />
5) After doing '''Save and Apply'''<br><br />
<br />
<br />
Back to [[FAQ]]</div>Eliashttps://wiki.barix.com/index.php?title=Barionet_1xxx&diff=4677Barionet 1xxx2017-07-11T14:06:58Z<p>Elias: /* HowTo */</p>
<hr />
<div>==Configuring the Barix Barionet 1000 as an access point==<br />
===HowTo===<br />
[[Image:Bari1.png|50px|thumb|right]]<br />
[[Image:Bari2.png|50px|thumb|right]]<br />
[[Image:Bari3.png|50px|thumb|right]]<br />
[[Image:Bari4.png|50px|thumb|right]]<br />
[[Image:Bari5.png|50px|thumb|right]]<br />
1) First, we need to Configure the LAN IP<br><br />
2) Then, we need to delete the WLAN IP. You should get a similar image after deletion of the WLAN<br><br />
3) Associate this to the LAN<br><br />
4) Make sure to check the LAN field<br><br />
5) After doing '''Save and Apply'''<br><br />
<br />
<br />
Back to [[FAQ]]</div>Eliashttps://wiki.barix.com/index.php?title=Barionet_1xxx&diff=4676Barionet 1xxx2017-07-11T14:06:17Z<p>Elias: /* HowTo */</p>
<hr />
<div>==Configuring the Barix Barionet 1000 as an access point==<br />
===HowTo===<br />
[[Image:Bari1.png|200px|thumb]]<br />
[[Image:Bari2.png|200px|thumb|right]]<br />
[[Image:Bari3.png|200px|thumb|right]]<br />
[[Image:Bari4.png|200px|thumb|right]]<br />
[[Image:Bari5.png|200px|thumb|right]]<br />
1) First, we need to Configure the LAN IP<br><br />
2) Then, we need to delete the WLAN IP. You should get a similar image after deletion of the WLAN<br><br />
3) Associate this to the LAN<br><br />
4) Make sure to check the LAN field<br><br />
5) After doing '''Save and Apply'''<br><br />
<br />
<br />
Back to [[FAQ]]</div>Eliashttps://wiki.barix.com/index.php?title=Barionet_1xxx&diff=4675Barionet 1xxx2017-07-11T14:05:42Z<p>Elias: /* HowTo */</p>
<hr />
<div>==Configuring the Barix Barionet 1000 as an access point==<br />
===HowTo===<br />
[[Image:Bari1.png|200px|thumb|right]]<br />
[[Image:Bari2.png|200px|thumb|right]]<br />
[[Image:Bari3.png|200px|thumb|right]]<br />
[[Image:Bari4.png|200px|thumb|right]]<br />
[[Image:Bari5.png|200px|thumb|right]]<br />
1) First, we need to Configure the LAN IP<br><br />
2) Then, we need to delete the WLAN IP. You should get a similar image after deletion of the WLAN<br><br />
3) Associate this to the LAN<br><br />
4) Make sure to check the LAN field<br><br />
5) After doing '''Save and Apply'''<br><br />
<br />
<br />
Back to [[FAQ]]</div>Eliashttps://wiki.barix.com/index.php?title=File:Bari5.png&diff=4674File:Bari5.png2017-07-11T14:04:40Z<p>Elias: </p>
<hr />
<div></div>Eliashttps://wiki.barix.com/index.php?title=File:Bari4.png&diff=4673File:Bari4.png2017-07-11T14:04:31Z<p>Elias: </p>
<hr />
<div></div>Eliashttps://wiki.barix.com/index.php?title=File:Bari3.png&diff=4672File:Bari3.png2017-07-11T14:04:21Z<p>Elias: </p>
<hr />
<div></div>Eliashttps://wiki.barix.com/index.php?title=File:Bari2.png&diff=4671File:Bari2.png2017-07-11T14:04:11Z<p>Elias: </p>
<hr />
<div></div>Eliashttps://wiki.barix.com/index.php?title=File:Bari1.png&diff=4670File:Bari1.png2017-07-11T14:03:59Z<p>Elias: </p>
<hr />
<div></div>Eliashttps://wiki.barix.com/index.php?title=Barionet_1xxx&diff=4669Barionet 1xxx2017-07-11T14:01:44Z<p>Elias: </p>
<hr />
<div>==Configuring the Barix Barionet 1000 as an access point==<br />
===HowTo===<br />
1) First, we need to Configure the LAN IP<br><br />
2) Then, we need to delete the WLAN IP. You should get a similar image after deletion of the WLAN<br><br />
3) Associate this to the LAN<br><br />
4) Make sure to check the LAN field<br><br />
5) After doing '''Save and Apply'''<br><br />
<br />
<br />
Back to [[FAQ]]</div>Eliashttps://wiki.barix.com/index.php?title=Barionet_1xxx&diff=4668Barionet 1xxx2017-07-11T14:00:45Z<p>Elias: Replacing page with '==Configuring the Barix Barionet 1000 as an access point==
===HowTo===
1) First, we need to Configure the LAN IP
2) Then, we need to delete the WLAN IP. You should get a simila...'</p>
<hr />
<div>==Configuring the Barix Barionet 1000 as an access point==<br />
===HowTo===<br />
1) First, we need to Configure the LAN IP<br />
2) Then, we need to delete the WLAN IP. You should get a similar image after deletion of the WLAN<br />
3) Associate this to the LAN<br />
4) Make sure to check the LAN field<br />
5) After doing '''Save and Apply'''<br />
<br />
<br />
Back to [[FAQ]]</div>Eliashttps://wiki.barix.com/index.php?title=Barionet_1xxx&diff=4667Barionet 1xxx2017-07-11T13:55:51Z<p>Elias: </p>
<hr />
<div>==Firmware Update==<br />
There are 4 methods for operating a FW upgrade on a Barix audio devices: WEB update, Serial Rescue, TFTP, Gold Unit. Each of them is suited for a different situation and purpose.<br />
<br />
===WEB update===<br />
The WEB update is done via a standard WEB Browser running on a PC. The device needs to be running on and visible to the IP network.<br />
<br />
This method is suited for field upgrade of the FW. It will not change the current configuration settings.<br />
<br />
You may need to force the Factory Default (keep reset button pressed 5-10 sec until lights change blinking) if you have major FW differences (implying a different EEPROM layout).<br><br />
<br />
'''Note''', the web update works only and always on port 80, even if you have changed the web server port in the configuration !!<br />
<br />
<br />
====Detailed procedure====<br />
(as per _readme1st.txt file provided in the rescue package)<br />
<br />
# Open a browser and type the announced IP address into the URL field and hit the ENTER key.<br />
# Click on the UPDATE button to enter the update page.<br />
# Click on "Please click here to continue" to launch the update process. The device will restart in a special mode called Bootloader showing a number counting down. Upon start up the following screen appears ready for the update process.<br />
# To upload and update click on "Browse" to locate the file you want to update. Browse to the folder "update_rescue" and choose the file compound.bin.<br />
# Once selected, click on "Upload". This process can take a few minutes. After a successful upload click on the "update" link and when the Update window reappears click the "Reboot" button or if there is no button, click on Browse and select the file "reboot". The device will reboot with the new firmware.<br />
<br />
====Upgrade Bootloader only====<br />
Sometimes it is necessary to upgrade the Bootloader only. This can be done as follow:<br />
<br />
# Open a browser and type the announced IP address into the URL field and hit the ENTER key.<br />
# Click on the UPDATE button to enter the update page.<br />
# Click on "Please click here to continue" to launch the update process. The device will restart in a special mode called Bootloader showing a number counting down. Upon start up the following screen appears ready for the update process.<br />
# Click on the "Advanced Update" link.<br />
# Type in a target web page (e.g. WEB14). This page should be unused. Attention: The name must be written in capital letters.<br />
# To upload and update the Bootloader click on "Browse" to locate the file you want to update. Browse to the folder "update_rescue" and choose the file UNIFULL.SPB.<br />
# Once selected, click on "Upload". This process can take a few seconds. After a successful upload click on the "update" link and when the Update window reappears click the "Reboot" button or if there is no button, click on Browse and select the file "reboot". The device will reboot with the new Bootloader.<br />
<br />
Attention: If the target web page was used this update overwrites the content in the web page. So be careful choosing the web page!<br />
<br />
===Serial Rescue===<br />
The Serial rescue operation is done via a serial cable and requires a command shell opened on a local PC. <br />
<br />
This method is suited for Rescue operation as it will also load the Boot-loader and restore the Default Settings.<br />
<br />
So if you need to keep the actual configuration settings:<br />
<br />
Open a browser and type the announced IP address followed by "/status" into theURL field and hit the ENTER key. <br />
<br />
Print this page which contains the current configuration settings of the device in order to reenter them after the update.<br />
<br />
====Detailed procedure==== <br />
(as per _readme1st.txt file provided in the rescue package)<br />
<br />
# Unplug power supply.<br />
# Connect the supplied serial crossover cable to your PC's serial port and to the devices serial port.<br />
# Start The following script in the folder "update_rescue" depending on your Barix device model and COM port you are using the information from the box below.<br />
# A message 'Waiting for the device' will be shown on the bottom of the screen.<br />
# Plug in the power supply now.<br />
# Wait until a message 'SUCCESSFUL' appears on the second line.<br />
# Close the rescue program.<br />
# Unplug power supply.<br />
# Plug in the power supply.<br />
# Your device is set to factory defaults and should work now. <br />
# Reconfigure the Exstreamer to your last configuration.<br />
<br />
Exstreamer 100/200 Exstreamer Legacy (red box, Digital, Gold)<br />
Instreamer 100 Instreamer Legacy<br />
Annuncicom 100 Annuncicom Legacy<br />
IPAM<br />
-----------------------------------------------------------<br />
COM 1 ipamres1.bat rescue1.bat<br />
COM 2 ipamres2.bat rescue2.bat<br />
COM 3 ipamres3.bat rescue3.bat<br />
COM 4 ipamres4.bat rescue4.bat<br />
<br />
=== TFTP===<br />
The TFTP firmware update allows to update Barix audio devices over network, over this it would be also possible to automate updates (e.g. to many devices over one script).<br />
To update the firmware components, the Barix device must be in Bootloader mode, <br />
only then the FTP Server is active.<br />
<br />
A firmware consists of different parts, over TFTP all these parts must/can be loaded separately with a separate TFTP command. An overview about the parts of the firmware is available in the "Gen.bat" (contained in FW package), this lists the files for the update and the target positionwhere the files must be loaded to.<br />
Here is an example (Gen.bat) from the ABCL SIP firmware:<br />
<br />
''load_win.exe -g compound.bin abclw.rom 0xc000 fs.bin 0xc100 sg.bin 0xc200 abclapp.cob 0xc400 custom1.cob 0xc600 esnd.rom 0xc800 bclio.bin 0xc900 applications.cob 0xcA00''<br />
<br />
When only the ABCL application should be changed but not the complete firmware, then the file "applications.cob" can be load to target "WEB10" (address 0xCA00 = target "WEB10").<br />
When only the file "custom1.cob" should be updated the this must be loaded to "WEB6" (address 0xC600 = target "WEB6").<br />
<br />
When the complete firmware package should be updated over TFTP then then all components must be loaded by separate TFTP commands. In this case the file for target "WEB0" (abclw.rom , the firmware file it self) should be loaded as last, because this is causing an automatic reboot on the Barix device and returning to normal operation mode.<br />
<br />
Syntax of the TFTP command (in windows) :<br />
<br />
''TFTP -i [ip-address] PUT [file] [target]''<br />
<br />
e.g. ''TFTP -i 192.168.1.25 put abclapp.cob WEB4''<br />
<br />
<br />
The following options can be used to bring a Barix device into bootloader mode:<br />
<br />
* power off, press reset button and keep it pressed while power on (for approx. 3 seconds)<br />
<br />
or <br />
<br />
* press the "Update" button from the Barix device´s web setup<br />
<br />
or <br />
<br />
* send the command "c=100" (e.g. over CGI) to bring the device into Bootloader mode<br />
<br />
<br />
=== Gold Unit===<br />
Barix Gold Unit is a standard Exstreamer 100 device loaded with a special SW. <br />
The Gold Unit has a USB memory stick attached which contains the binary files to be loaded to the other devices.<br />
<br />
The update operation is done via an Ethernet cross cable and optionally requires a serial Terminal running on a local PC for monitoring.<br />
<br />
This method is suited for programming in production and can be tailored in terms of modules to be loaded.<br />
<br />
If customer needs new Default Settings to be loaded, Barix can provide a customized version of the configuration file (config.bin).<br />
<br />
====Detailed procedure==== <br />
''Prepare USB files''<br />
<br />
The files on the USB sticks must follow a name convention in order to be loaded automatically i.e. a file on the memory<br />
stick called WEB03 will be loaded into the flash page 3, a file named WEB10 will be loaded into the flash page 10 and so on. <br />
The file FBOOT will replace the bootloader. The name EEPRO is used to write to the configuration memory (i.e. the eeprom). <br />
<br />
The files will be available soon in standard rescue kits. <br />
<br />
''Update new Units''<br />
<br />
For the units to be loaded containing already a firmware the user would need to:<br />
<br />
# attach the unit to be updated to the Gold Unit via Ethernet connection (direct cross cable or isolated switch) with DHCP enabled (no fixed IP allowed).<br />
# start the unit to be updated in the boot-loader mode (by keeping the reset button pressed during start-up).<br />
# after a short delay (1-2seconds) the boot-loader comes up and the file transfer will start automatically. The update operation will be completed in few seconds.<br />
<br />
Optionally use a serial Terminal on the unit to be updated to verify that the download is started and finished OK.<br />
<br />
Back to [[FAQ]]</div>Eliashttps://wiki.barix.com/index.php?title=Barionet_1xxx&diff=4666Barionet 1xxx2017-06-07T09:04:39Z<p>Elias: Replacing page with 'Under Construction'</p>
<hr />
<div>Under Construction</div>Eliashttps://wiki.barix.com/index.php?title=Barionet_1xxx&diff=4665Barionet 1xxx2017-06-07T09:04:03Z<p>Elias: New page: <html> <head> <meta http-equiv=Content-Type content="text/html; charset=unicode"> <meta name=Generator content="Microsoft Word 15 (filtered)"> <title>How to configure the Barionet 1000 a...</p>
<hr />
<div><br />
<html><br />
<br />
<head><br />
<meta http-equiv=Content-Type content="text/html; charset=unicode"><br />
<meta name=Generator content="Microsoft Word 15 (filtered)"><br />
<title>How to configure the Barionet 1000 as a Wi-Fi client</title><br />
<style><br />
<!--<br />
@media print {<br />
#main {<br />
padding-bottom: 1em !important; /* The default padding of 6em is too much for printouts */<br />
}<br />
<br />
body {<br />
font-family: Arial, Helvetica, FreeSans, sans-serif;<br />
font-size: 10pt;<br />
line-height: 1.2;<br />
}<br />
<br />
body, #full-height-container, #main, #page, #content, .has-personal-sidebar #content {<br />
background: #fff !important;<br />
color: #000 !important;<br />
border: 0 !important;<br />
width: 100% !important;<br />
height: auto !important;<br />
min-height: auto !important;<br />
margin: 0 !important;<br />
padding: 0 !important;<br />
display: block !important;<br />
}<br />
<br />
a, a:link, a:visited, a:focus, a:hover, a:active {<br />
color: #000;<br />
}<br />
<br />
#content h1,<br />
#content h2,<br />
#content h3,<br />
#content h4,<br />
#content h5,<br />
#content h6 {<br />
font-family: Arial, Helvetica, FreeSans, sans-serif;<br />
page-break-after: avoid;<br />
}<br />
<br />
pre {<br />
font-family: Monaco, "Courier New", monospace;<br />
}<br />
<br />
#header,<br />
.aui-header-inner,<br />
#navigation,<br />
#sidebar,<br />
.sidebar,<br />
#personal-info-sidebar,<br />
.ia-fixed-sidebar,<br />
.page-actions,<br />
.navmenu,<br />
.ajs-menu-bar,<br />
.noprint,<br />
.inline-control-link,<br />
.inline-control-link a,<br />
a.show-labels-editor,<br />
.global-comment-actions,<br />
.comment-actions,<br />
.quick-comment-container,<br />
#addcomment {<br />
display: none !important;<br />
}<br />
<br />
/* CONF-28544 cannot print multiple pages in IE */<br />
#splitter-content {<br />
position: relative !important;<br />
}<br />
<br />
.comment .date::before {<br />
content: none !important; /* remove middot for print view */<br />
}<br />
<br />
h1.pagetitle img {<br />
height: auto;<br />
width: auto;<br />
}<br />
<br />
.print-only {<br />
display: block;<br />
}<br />
<br />
#footer {<br />
position: relative !important; /* CONF-17506 Place the footer at end of the content */<br />
margin: 0;<br />
padding: 0;<br />
background: none;<br />
clear: both;<br />
}<br />
<br />
#poweredby {<br />
border-top: none;<br />
background: none;<br />
}<br />
<br />
#poweredby li.print-only {<br />
display: list-item;<br />
font-style: italic;<br />
}<br />
<br />
#poweredby li.noprint {<br />
display: none;<br />
}<br />
<br />
/* no width controls in print */<br />
.wiki-content .table-wrap,<br />
.wiki-content p,<br />
.panel .codeContent,<br />
.panel .codeContent pre,<br />
.image-wrap {<br />
overflow: visible !important;<br />
}<br />
<br />
/* TODO - should this work? */<br />
#children-section,<br />
#comments-section .comment,<br />
#comments-section .comment .comment-body,<br />
#comments-section .comment .comment-content,<br />
#comments-section .comment p {<br />
page-break-inside: avoid;<br />
}<br />
<br />
#page-children a {<br />
text-decoration: none;<br />
}<br />
<br />
/**<br />
hide twixies<br />
<br />
the specificity here is a hack because print styles<br />
are getting loaded before the base styles. */<br />
#comments-section.pageSection .section-header,<br />
#comments-section.pageSection .section-title,<br />
#children-section.pageSection .section-header,<br />
#children-section.pageSection .section-title,<br />
.children-show-hide {<br />
padding-left: 0;<br />
margin-left: 0;<br />
}<br />
<br />
.children-show-hide.icon {<br />
display: none;<br />
}<br />
<br />
/* personal sidebar */<br />
.has-personal-sidebar #content {<br />
margin-right: 0px;<br />
}<br />
<br />
.has-personal-sidebar #content .pageSection {<br />
margin-right: 0px;<br />
}<br />
<br />
.no-print, .no-print * {<br />
display: none !important;<br />
}<br />
}<br />
<br />
/* Font Definitions */<br />
@font-face<br />
{font-family:Wingdings;<br />
panose-1:5 0 0 0 0 0 0 0 0 0;}<br />
@font-face<br />
{font-family:"Cambria Math";<br />
panose-1:2 4 5 3 5 4 6 3 2 4;}<br />
@font-face<br />
{font-family:Calibri;<br />
panose-1:2 15 5 2 2 2 4 3 2 4;}<br />
/* Style Definitions */<br />
p.MsoNormal, li.MsoNormal, div.MsoNormal<br />
{margin:0in;<br />
margin-bottom:.0001pt;<br />
font-size:12.0pt;<br />
font-family:"Times New Roman",serif;}<br />
h1<br />
{mso-style-link:"Heading 1 Char";<br />
margin-right:0in;<br />
margin-left:0in;<br />
font-size:24.0pt;<br />
font-family:"Times New Roman",serif;<br />
font-weight:bold;}<br />
h3<br />
{mso-style-link:"Heading 3 Char";<br />
margin-right:0in;<br />
margin-left:0in;<br />
font-size:13.5pt;<br />
font-family:"Times New Roman",serif;<br />
font-weight:bold;}<br />
p<br />
{margin-right:0in;<br />
margin-left:0in;<br />
font-size:12.0pt;<br />
font-family:"Times New Roman",serif;}<br />
p.msonormal0, li.msonormal0, div.msonormal0<br />
{mso-style-name:msonormal;<br />
margin-right:0in;<br />
margin-left:0in;<br />
font-size:12.0pt;<br />
font-family:"Times New Roman",serif;}<br />
span.Heading1Char<br />
{mso-style-name:"Heading 1 Char";<br />
mso-style-link:"Heading 1";<br />
font-family:"Calibri Light",sans-serif;<br />
color:#2F5496;}<br />
span.Heading3Char<br />
{mso-style-name:"Heading 3 Char";<br />
mso-style-link:"Heading 3";<br />
font-family:"Calibri Light",sans-serif;<br />
color:#1F3763;}<br />
.MsoChpDefault<br />
{font-size:10.0pt;}<br />
@page WordSection1<br />
{size:8.5in 11.0in;<br />
margin:1.0in 1.0in 1.0in 1.0in;}<br />
div.WordSection1<br />
{page:WordSection1;}<br />
/* List Definitions */<br />
ol<br />
{margin-bottom:0in;}<br />
ul<br />
{margin-bottom:0in;}<br />
--><br />
</style><br />
<br />
</head><br />
<br />
<body lang=EN-US><br />
<br />
<div class=WordSection1><br />
<br />
<h1><span style='font-family:"Calibri",sans-serif'>How to configure the<br />
Barionet 1000 as a Wi-Fi client</span></h1><br />
<br />
<p><span style='font-family:"Calibri",sans-serif'>On this chapter, you will<br />
learn how to configure the Barionet 1000 to act as a Wi-Fi client. By default,<br />
the Barionet 1000 acts as a Wireless Access Point (WAP).</span></p><br />
<br />
<p><span style='font-family:"Calibri",sans-serif'>&nbsp;</span></p><br />
<br />
<h3 id="HowtoconfiguretheBarionet1000asaWi-Ficlient-Prerequisites:"><u><span<br />
style='font-family:"Calibri",sans-serif'>Prerequisites</span></u><span<br />
style='font-family:"Calibri",sans-serif'>:</span></h3><br />
<br />
<ul type=disc><br />
<li class=MsoNormal><span style='font-family:"Calibri",sans-serif'>Barionet<br />
1000 with the firmware<br />
“openwrt-ramips-mt7620-bar1koem-a1-squashfs-sysupgrade-4.bin” installed</span></li><br />
<li class=MsoNormal><span style='font-family:"Calibri",sans-serif'>It is<br />
assumed that you can browse your device using the WebUI.</span></li><br />
</ul><br />
<br />
<p><span style='font-family:"Calibri",sans-serif'>&nbsp;</span></p><br />
<br />
<h3 id="HowtoconfiguretheBarionet1000asaWi-Ficlient-Stepstofollow:"><u><span<br />
style='font-family:"Calibri",sans-serif'>Steps to follow</span></u><span<br />
style='font-family:"Calibri",sans-serif'>:</span></h3><br />
<br />
<p><span style='font-family:"Calibri",sans-serif'>&nbsp;</span></p><br />
<br />
<p><span style='font-family:"Calibri",sans-serif'>Go to the menu Network<br />
&nbsp;--&gt; Interfaces</span></p><br />
<br />
<p><span style='font-family:"Calibri",sans-serif'><img width=468 height=255<br />
id="Picture 1"<br />
src="How+to+configure+the+Barionet+1000+as+a+Wi-Fi+client_files/image015.png"></span></p><br />
<br />
<p><span style='font-family:"Calibri",sans-serif'>On the Wireless Overview, you<br />
will see an SSID called “Barionet_1165” or similar. Remove it.</span></p><br />
<br />
<p><span style='font-family:"Calibri",sans-serif'><img width=468 height=221<br />
id="Picture 2"<br />
src="How+to+configure+the+Barionet+1000+as+a+Wi-Fi+client_files/image016.png"></span></p><br />
<br />
<p><span style='font-family:"Calibri",sans-serif'>&nbsp;</span></p><br />
<br />
<p><span style='font-family:"Calibri",sans-serif'>After that, click on the<br />
button Scan</span></p><br />
<br />
<p><span style='font-family:"Calibri",sans-serif'><img width=468 height=109<br />
id="Picture 3"<br />
src="How+to+configure+the+Barionet+1000+as+a+Wi-Fi+client_files/image017.png"></span></p><br />
<br />
<p><span style='font-family:"Calibri",sans-serif'>After the Scan, you will see<br />
a list of the available SSID that are reachable from your Barionet 1000.</span></p><br />
<br />
<p><span style='font-family:"Calibri",sans-serif'>&nbsp;</span></p><br />
<br />
<p><span style='font-family:"Calibri",sans-serif'><img width=468 height=370<br />
id="Picture 4"<br />
src="How+to+configure+the+Barionet+1000+as+a+Wi-Fi+client_files/image018.png"></span></p><br />
<br />
<p><span style='font-family:"Calibri",sans-serif'>Then, just click on “Join<br />
Network” and you will see the next step</span></p><br />
<br />
<p><span style='font-family:"Calibri",sans-serif'><img width=468 height=284<br />
id="Picture 5"<br />
src="How+to+configure+the+Barionet+1000+as+a+Wi-Fi+client_files/image019.png"></span></p><br />
<br />
<p><span style='font-family:"Calibri",sans-serif'>Add the Wi-Fi password at the<br />
“WPA passphrase” area and click “Submit.</span></p><br />
<br />
<p><span style='font-family:"Calibri",sans-serif'>On the next page, click on<br />
“Save &amp; Apply”</span></p><br />
<br />
<p><span style='font-family:"Calibri",sans-serif'><img width=468 height=266<br />
id="Picture 6"<br />
src="How+to+configure+the+Barionet+1000+as+a+Wi-Fi+client_files/image020.png"></span></p><br />
<br />
<p><span style='font-family:"Calibri",sans-serif'>&nbsp;</span></p><br />
<br />
<p><span style='font-family:"Calibri",sans-serif'>After that, you will need to<br />
wait around 10 seconds and your Barionet 1000 will be connected to your<br />
Wireless network.</span></p><br />
<br />
<p><span style='font-family:"Calibri",sans-serif'><img width=468 height=217<br />
id="Picture 7"<br />
src="How+to+configure+the+Barionet+1000+as+a+Wi-Fi+client_files/image021.png"></span></p><br />
<br />
<p><span style='font-family:"Calibri",sans-serif'>&nbsp;</span></p><br />
<br />
<p><span style='font-family:"Calibri",sans-serif'>&nbsp;</span></p><br />
<br />
<p><span style='font-family:"Calibri",sans-serif'>&nbsp;</span></p><br />
<br />
</div><br />
<br />
</body><br />
<br />
</html></div>Eliashttps://wiki.barix.com/index.php?title=Main_Page&diff=4664Main Page2017-06-07T09:03:45Z<p>Elias: /* Automation and Control Linux/OpenWrt based */</p>
<hr />
<div><big>'''Barix Wiki'''</big><br />
<br />
The Barix Wiki is maintained by Barix staff and users/community. Barix does try to keep the content accurate and error free, and we do review third party contributions, however, we can not guarantee everything is 100% accurate or up-to-date.<br />
If you find any mistakes, errors etc. - please feel free to correct them !<br />
<br />
== Barix Newsletter ==<br />
<br />
[http://newsletter.barix.com/public/archive.php Click here to read the Barix newsletters.]<br />
<br />
<br />
== Products ==<br />
=== Audio - Devices and accessories ===<br />
* [[Product Matrix]] - List of HW capabilities versus SW features <br />
* [[Exstreamer 100]] - Network Audio Decoder with USB<br />
* [[Exstreamer 105]] - Network Audio Decoder with MicroSD slot<br />
* [[Exstreamer 110]] - Network Audio Decoder with display and USB<br />
* [[Exstreamer 120]] - Network Audio Decoder with display and MicroSD slot<br />
* [[Exstreamer 200]] - Network Audio Decoder with built-in 2x25W class-D amplifier (USB)<br />
* [[Exstreamer 205]] - Network Audio Decoder with built-in 2x25W class-D amplifier (MicroSD)<br />
* [[Exstreamer P5]] - Network Audio Decoder with built-in 5W amplifier and POE<br />
* [[Exstreamer 500]] - High Quality Network Audio Encoder/Decoder with symmetric Audio interfaces <br />
* [[Exstreamer 1000]] - High Quality Network Audio Encoder/Decoder with symmetric Audio interfaces and AES/EBU<br />
* [[Instreamer]] - General Purpose Network Audio Encoder - new<br />
* [[Instreamer 100]] - General Purpose Network Audio Encoder<br />
* [[Annuncicom 60]] - General Purpose Bidirectional Network Audio Device<br />
* [[Annuncicom 100]] - General Purpose Bidirectional Network Audio Device with I/O<br />
* [[Annuncicom 155]] - General Purpose Bidirectional Network Audio Device with I/O for harsh environments<br />
* [[Annuncicom 200]] - Network Audio Device suitable for intercom/paging applications with 8W output amplifier and PoE<br />
* [[Annuncicom 1000]] - High End Network Audio Device with balanced audio interfaces and supervised contact closures<br />
* [[Radiobox]] - Radiobox and "Radiobox Pro" - Barix products ?<br />
* [[IPAM 100]] - Embedded IP audio module for OEM with dual network and serial interfaces<br />
* [[IPAM 102]] - Embedded IP audio module for OEM with dual network and multiple serial interfaces - new<br />
* [[IPAM 200 / IPAM 300]] - Embedded IP audio module for OEM (decoder only)<br />
* [[PS1]] - Multifunctional digital desktop paging station PS1<br />
* [[PS16]] - Multifunctional digital desktop paging station PS16<br />
* [[VSC]] - Volume Source Control accessory<br />
=== Automation and Control Linux/OpenWrt based===<br />
* [[List of HW]] Capabilities and SW features<br />
* [[Barionet 1000]] Linux based IP Automation Controller<br />
* [[Barionet 1xxx]] Howto's<br />
<br />
=== Automation and Control - BCL based===<br />
* [[Automation and Control Product Matrix]] - List of HW capabilities versus SW features <br />
* [[Barionet 100]] - General Purpose IP Automation Controller with SNMP and Modbus/TCP support, fully programmable. Various I/O capabilities<br />
* [[Barionet 50]] - Low Cost IP Automation Controller with contact closure inputs, relay outputs, serial ports and Dallas Onewire interface<br />
* [[Barix IO12]] - Modbus/RS-485 I/O Interface (12 in, 12 out)<br />
* [[Barix R6]] - Modbus/RS-485 I/O Interface (6 relays)<br />
* [[Barix X8]] - Multipurpose Modbus/RS-485 I/O Interface (8 selectable I/O)<br />
* [[Barix TS]] - onewire temperature sensors<br />
* [[Barimon]] - web tool for collecting data from Barix devices: http://www.barimon.net/<br />
<br />
== Applications ==<br />
Barix products can be used in a vast variety of applications and markets. Below links bring you to pages which describe applications, which products to use etc<br />
* [[Automation Applications]] - this includes data conversion, collection, remote managment and monitoring (non-audio) applications<br />
* [[Broadcast Applications]] - Applications in the Broadcast Industry such as STL, internet radio, monitoring<br />
* [[In-Store Music Applications]] - Applications for distribution of live music or "download and playback" on schedule.<br />
* [[General Audio Distribution Applications]] - distribution of audio channels in hotels, over the internet, homes, amusement parks etc.<br />
* [[Business Music]] - distribution of audio channels and/or music in hotels, bars, retail, etc. over the internet<br />
* [[Security Applications]] - Use of the Barix products in security survailance and evacuation applications<br />
* [[Alarm Applications]] - Use of the Barix products in emergency alerting applications<br />
* [[SIP Applications]] - Use of the Barix products with SIP protocol for SIP speaker, intercom, phone applications<br />
* [[Crestron Integration]] - integrating audio over IP with Crestron touchpanels<br />
* [[IP based Intercom technology]] - a general description and Intercom Applications<br />
* [[Institutional Applications]] - applications for institutionals, like campus, churches or hospitals, ...<br />
* [[Rebroadcasting Application]] - what does it do ?<br />
* [[Messaging / Music on Hold Application from MOH Technology]]<br />
* [[Scheduling of Audio or commands]]<br />
<br />
== Hardware Topics ==<br />
* [[Software/Hardware compatibility matrix]]<br />
* [[USB device compatibility list]]<br />
* [[USB and IPAM layout rules]]<br />
* [[Microphones]]<br />
* [[Exstreamer P5 and Infrared]]<br />
* '''[[ESD protection enhancement how-to]]'''<br />
<br />
== Software Topics ==<br />
<br />
* [[SoundScape]]<br />
* [[General Topics]]<br />
* [[Protocols used in Barix Products]]<br />
* [[Streaming Client]]<br />
* [[Streaming Client with USB encryption for Digital Rights Management]]<br />
* [[Freeware from Barix]]<br />
* [[BCL Topics]]<br />
* [[Ethersound]]<br />
* [[IP Audio Delay]]<br />
* [[RTP Buffering - Frame Based Buffering]]<br />
* [[SIP Applications]]<br />
* [[VAcard PC software]]<br />
* [[Redundancy]]<br />
* [[Customization of Barix Firmwares]]<br />
<br />
== Support - FAQ & Troubleshooting ==<br />
<br />
* [[FAQ]] - general questions, sections about audio and control products<br />
<br />
* [[Troubleshooting]]<br />
<br />
* [[Reflector]]<br />
<br />
== Sales & Marketing ==<br />
* [[Email form test]]<br />
<br />
== Some useful links for using the Wiki ==<br />
Consult the [http://meta.wikimedia.org/wiki/Help:Contents User's Guide] for information on using the wiki software.<br />
<br />
=== Getting started ===<br />
* [http://www.mediawiki.org/wiki/Manual:Configuration_settings Configuration settings list]<br />
* [http://www.mediawiki.org/wiki/Manual:FAQ MediaWiki FAQ]<br />
* [https://lists.wikimedia.org/mailman/listinfo/mediawiki-announce MediaWiki release mailing list]</div>Eliashttps://wiki.barix.com/index.php?title=Main_Page&diff=4663Main Page2017-06-07T09:02:35Z<p>Elias: /* Automation and Control Linux/OpenWrt based */</p>
<hr />
<div><big>'''Barix Wiki'''</big><br />
<br />
The Barix Wiki is maintained by Barix staff and users/community. Barix does try to keep the content accurate and error free, and we do review third party contributions, however, we can not guarantee everything is 100% accurate or up-to-date.<br />
If you find any mistakes, errors etc. - please feel free to correct them !<br />
<br />
== Barix Newsletter ==<br />
<br />
[http://newsletter.barix.com/public/archive.php Click here to read the Barix newsletters.]<br />
<br />
<br />
== Products ==<br />
=== Audio - Devices and accessories ===<br />
* [[Product Matrix]] - List of HW capabilities versus SW features <br />
* [[Exstreamer 100]] - Network Audio Decoder with USB<br />
* [[Exstreamer 105]] - Network Audio Decoder with MicroSD slot<br />
* [[Exstreamer 110]] - Network Audio Decoder with display and USB<br />
* [[Exstreamer 120]] - Network Audio Decoder with display and MicroSD slot<br />
* [[Exstreamer 200]] - Network Audio Decoder with built-in 2x25W class-D amplifier (USB)<br />
* [[Exstreamer 205]] - Network Audio Decoder with built-in 2x25W class-D amplifier (MicroSD)<br />
* [[Exstreamer P5]] - Network Audio Decoder with built-in 5W amplifier and POE<br />
* [[Exstreamer 500]] - High Quality Network Audio Encoder/Decoder with symmetric Audio interfaces <br />
* [[Exstreamer 1000]] - High Quality Network Audio Encoder/Decoder with symmetric Audio interfaces and AES/EBU<br />
* [[Instreamer]] - General Purpose Network Audio Encoder - new<br />
* [[Instreamer 100]] - General Purpose Network Audio Encoder<br />
* [[Annuncicom 60]] - General Purpose Bidirectional Network Audio Device<br />
* [[Annuncicom 100]] - General Purpose Bidirectional Network Audio Device with I/O<br />
* [[Annuncicom 155]] - General Purpose Bidirectional Network Audio Device with I/O for harsh environments<br />
* [[Annuncicom 200]] - Network Audio Device suitable for intercom/paging applications with 8W output amplifier and PoE<br />
* [[Annuncicom 1000]] - High End Network Audio Device with balanced audio interfaces and supervised contact closures<br />
* [[Radiobox]] - Radiobox and "Radiobox Pro" - Barix products ?<br />
* [[IPAM 100]] - Embedded IP audio module for OEM with dual network and serial interfaces<br />
* [[IPAM 102]] - Embedded IP audio module for OEM with dual network and multiple serial interfaces - new<br />
* [[IPAM 200 / IPAM 300]] - Embedded IP audio module for OEM (decoder only)<br />
* [[PS1]] - Multifunctional digital desktop paging station PS1<br />
* [[PS16]] - Multifunctional digital desktop paging station PS16<br />
* [[VSC]] - Volume Source Control accessory<br />
=== Automation and Control Linux/OpenWrt based===<br />
* [[List of HW]] Capabilities and SW features<br />
* [[Barionet 1000]] Linux based IP Automation Controller<br />
* [[Barionet 1000]] Howto's<br />
<br />
=== Automation and Control - BCL based===<br />
* [[Automation and Control Product Matrix]] - List of HW capabilities versus SW features <br />
* [[Barionet 100]] - General Purpose IP Automation Controller with SNMP and Modbus/TCP support, fully programmable. Various I/O capabilities<br />
* [[Barionet 50]] - Low Cost IP Automation Controller with contact closure inputs, relay outputs, serial ports and Dallas Onewire interface<br />
* [[Barix IO12]] - Modbus/RS-485 I/O Interface (12 in, 12 out)<br />
* [[Barix R6]] - Modbus/RS-485 I/O Interface (6 relays)<br />
* [[Barix X8]] - Multipurpose Modbus/RS-485 I/O Interface (8 selectable I/O)<br />
* [[Barix TS]] - onewire temperature sensors<br />
* [[Barimon]] - web tool for collecting data from Barix devices: http://www.barimon.net/<br />
<br />
== Applications ==<br />
Barix products can be used in a vast variety of applications and markets. Below links bring you to pages which describe applications, which products to use etc<br />
* [[Automation Applications]] - this includes data conversion, collection, remote managment and monitoring (non-audio) applications<br />
* [[Broadcast Applications]] - Applications in the Broadcast Industry such as STL, internet radio, monitoring<br />
* [[In-Store Music Applications]] - Applications for distribution of live music or "download and playback" on schedule.<br />
* [[General Audio Distribution Applications]] - distribution of audio channels in hotels, over the internet, homes, amusement parks etc.<br />
* [[Business Music]] - distribution of audio channels and/or music in hotels, bars, retail, etc. over the internet<br />
* [[Security Applications]] - Use of the Barix products in security survailance and evacuation applications<br />
* [[Alarm Applications]] - Use of the Barix products in emergency alerting applications<br />
* [[SIP Applications]] - Use of the Barix products with SIP protocol for SIP speaker, intercom, phone applications<br />
* [[Crestron Integration]] - integrating audio over IP with Crestron touchpanels<br />
* [[IP based Intercom technology]] - a general description and Intercom Applications<br />
* [[Institutional Applications]] - applications for institutionals, like campus, churches or hospitals, ...<br />
* [[Rebroadcasting Application]] - what does it do ?<br />
* [[Messaging / Music on Hold Application from MOH Technology]]<br />
* [[Scheduling of Audio or commands]]<br />
<br />
== Hardware Topics ==<br />
* [[Software/Hardware compatibility matrix]]<br />
* [[USB device compatibility list]]<br />
* [[USB and IPAM layout rules]]<br />
* [[Microphones]]<br />
* [[Exstreamer P5 and Infrared]]<br />
* '''[[ESD protection enhancement how-to]]'''<br />
<br />
== Software Topics ==<br />
<br />
* [[SoundScape]]<br />
* [[General Topics]]<br />
* [[Protocols used in Barix Products]]<br />
* [[Streaming Client]]<br />
* [[Streaming Client with USB encryption for Digital Rights Management]]<br />
* [[Freeware from Barix]]<br />
* [[BCL Topics]]<br />
* [[Ethersound]]<br />
* [[IP Audio Delay]]<br />
* [[RTP Buffering - Frame Based Buffering]]<br />
* [[SIP Applications]]<br />
* [[VAcard PC software]]<br />
* [[Redundancy]]<br />
* [[Customization of Barix Firmwares]]<br />
<br />
== Support - FAQ & Troubleshooting ==<br />
<br />
* [[FAQ]] - general questions, sections about audio and control products<br />
<br />
* [[Troubleshooting]]<br />
<br />
* [[Reflector]]<br />
<br />
== Sales & Marketing ==<br />
* [[Email form test]]<br />
<br />
== Some useful links for using the Wiki ==<br />
Consult the [http://meta.wikimedia.org/wiki/Help:Contents User's Guide] for information on using the wiki software.<br />
<br />
=== Getting started ===<br />
* [http://www.mediawiki.org/wiki/Manual:Configuration_settings Configuration settings list]<br />
* [http://www.mediawiki.org/wiki/Manual:FAQ MediaWiki FAQ]<br />
* [https://lists.wikimedia.org/mailman/listinfo/mediawiki-announce MediaWiki release mailing list]</div>Eliashttps://wiki.barix.com/index.php?title=Barionet_1000&diff=4662Barionet 10002017-05-30T12:51:24Z<p>Elias: </p>
<hr />
<div>[[Image:Csm_Barionet_1000_27fd3073ca.png|200px|thumb|right]]<br />
[[Image:Imagem_barionet.png|200px|thumb|right]]<br />
<br />
The BARIONET 1000 is a Linux/Open- WRT based universal, fully programmable I/O device server. I/O interfaces include two USB host interfaces, WiFi connection, a serial port, analog and digital I/Os, Relays and Dallas 1-wire support - and it is IPv6 capable. <br />
<br />
'''APPLICATIONS'''<br><br />
• Access Control/Door controller<br><br />
• Environmental monitoring, logging and alarming<br><br />
• Contact closure monitoring<br><br />
• PV power management<br><br />
• Temperature monitoring, logging and HVAC control<br><br />
<br />
'''Summary'''<br><br />
• Full user programmable (Python,LUA,Shell Scripts) <br><br />
• USB Host Ports<br><br />
• Wi-Fi 802.11 b/g/n<br><br />
• IPv6 capable<br><br />
• Full user programmable<br><br />
• Versatile I/O<br><br />
• Classic Barionet Din-Rail Case<br><br />
• 2-year warranty<br><br />
• Developed in Switzerland<br><br />
• Manufactured in the EU<br><br />
<br />
More information available in our website:<br><br />
http://www.barix.com/control-products/barionet-family/barix/Product/show/barionet-1000/<br><br />
And in the openwrt Wiki:<br><br />
https://wiki.openwrt.org/toh/barix/barix_barionet_1000<br><br />
<br><br />
Back to [[Main Page#Products]]</div>Eliashttps://wiki.barix.com/index.php?title=Barionet_1000&diff=4661Barionet 10002017-05-30T12:47:46Z<p>Elias: </p>
<hr />
<div>[[Image:Csm_Barionet_1000_27fd3073ca.png|200px|thumb|right]]<br />
[[Image:Imagem_barionet.png|200px|thumb|right]]<br />
<br />
The BARIONET 1000 is a Linux/Open- WRT based universal, fully programmable I/O device server. I/O interfaces include two USB host interfaces, WiFi connection, a serial port, analog and digital I/Os, Relays and Dallas 1-wire support - and it is IPv6 capable. <br />
<br />
'''APPLICATIONS'''<br><br />
• Access Control/Door controller<br><br />
• Environmental monitoring, logging and alarming<br><br />
• Contact closure monitoring<br><br />
• PV power management<br><br />
• Temperature monitoring, logging and HVAC control<br><br />
<br />
'''Summary'''<br><br />
• Full user programmable (Python,LUA,Shell Scripts) <br><br />
• USB Host Ports<br><br />
• Wi-Fi 802.11 b/g/n<br><br />
• IPv6 capable<br><br />
• Full user programmable<br><br />
• Versatile I/O<br><br />
• Classic Barionet Din-Rail Case<br><br />
• 2-year warranty<br><br />
• Developed in Switzerland<br><br />
• Manufactured in the EU<br><br />
<br />
More information available in our website:<br><br />
http://www.barix.com/control-products/barionet-family/barix/Product/show/barionet-1000/<br><br />
https://wiki.openwrt.org/toh/barix/barix_barionet_1000<br><br />
<br><br />
Back to [[Main Page#Products]]</div>Eliashttps://wiki.barix.com/index.php?title=File:Imagem_barionet.png&diff=4660File:Imagem barionet.png2017-05-30T12:47:03Z<p>Elias: </p>
<hr />
<div></div>Eliashttps://wiki.barix.com/index.php?title=Barionet_1000&diff=4659Barionet 10002017-05-30T12:46:26Z<p>Elias: </p>
<hr />
<div>[[Image:Csm_Barionet_1000_27fd3073ca.png|200px|thumb|right]]<br />
<br />
The BARIONET 1000 is a Linux/Open- WRT based universal, fully programmable I/O device server. I/O interfaces include two USB host interfaces, WiFi connection, a serial port, analog and digital I/Os, Relays and Dallas 1-wire support - and it is IPv6 capable. <br />
<br />
'''APPLICATIONS'''<br><br />
• Access Control/Door controller<br><br />
• Environmental monitoring, logging and alarming<br><br />
• Contact closure monitoring<br><br />
• PV power management<br><br />
• Temperature monitoring, logging and HVAC control<br><br />
<br />
'''Summary'''<br><br />
• Full user programmable (Python,LUA,Shell Scripts) <br><br />
• USB Host Ports<br><br />
• Wi-Fi 802.11 b/g/n<br><br />
• IPv6 capable<br><br />
• Full user programmable<br><br />
• Versatile I/O<br><br />
• Classic Barionet Din-Rail Case<br><br />
• 2-year warranty<br><br />
• Developed in Switzerland<br><br />
• Manufactured in the EU<br><br />
<br />
More information available in our website:<br><br />
http://www.barix.com/control-products/barionet-family/barix/Product/show/barionet-1000/<br><br />
https://wiki.openwrt.org/toh/barix/barix_barionet_1000<br><br />
<br><br />
Back to [[Main Page#Products]]</div>Elias