Barix Wiki - User contributions [en]

Source to multipoint distribution

2009-01-29T10:56:52Z

AchimSchoene:

== Sending Meta-data from the Instreamer ==

To send metadata please use the E=command. After the "E" parameter, you should see the song´s title. The command is extreamely key sensitive. The correct syntax is:

<pre>
http://<ip-instreamer>/rc.cgi?E=StreamTitle='Title';
</pre>

The Keyword: "StreamTitle" must be written as it is in the example. Please do not forget the " ' "signs and the " ; " at the end of the command.

The E=command work on Internet Radio mode. It could also sucessfully transfer the metadata through a Shoutcast server, when the Shoutcast Server work in the RELAY mode.

Shoutcast config (Instreamer IP: 192.168.110.179):

RelayPort=8000
RelayServer=192.168.110.179

Instreamer Config:

Shoutcast Source: 0.0.0.0 : 8000

Source to multipoint distribution

2009-01-29T10:52:57Z

AchimSchoene:

Source to multipoint distribution

2009-01-29T10:47:51Z

AchimSchoene:

== Sending Meta-data from the Instreamer ==

To send metadata please use the E=command. After the "E" parameter, you should see the song´s title. The command is extreamely key sensitive. The correct syntax is:

<pre>
http://<ip-instreamer>/rc.cgi?E=StreamTitle='Title';
</pre>

The Keyword: "StreamTitle" must be written as it is in the example. Please do not forget the " ' "signs and the " ; " at the end of the command.

The E= command work on Internet Radio mode. It could also sucessfully transfer the metadata through a Shoutcast server, when the Shoutcast Server work in the RELAY mode.

Shoutcast config:

RelayPort=8000
RelayServer=192.168.110.179 (Instreamer IP)

Instreamer Config:

Shoutcast Source : 0.0.0.0 : 8000

Source to multipoint distribution

2009-01-29T10:44:02Z

AchimSchoene: adding new topic

== Sending Meta-data from the Instreamer ==

To send metadata please use the E= command. After the "E" parameter, you should see the song´s title. The command is extreamely key sensitive. The correct syntax is:

<pre>
http://<ip-instreamer>/rc.cgi?E=StreamTitle='Title';
</pre>

The Keyword: "StreamTitle" must be written as it is in the example. Please do not forget the " ' "signs and the " ; " at the end of the command.

The E= command work on Internet Radio mode. It could also sucessfully transfer the metadata through a Shoutcast server, when the Shoutcast Server work in the RELAY mode.

Shoutcast config:
RelayPort=8000
RelayServer=192.168.110.179 (Instreamer IP)

Instreamer Config:
Shoutcast Source : 0.0.0.0 : 8000

Source to multipoint distribution

2009-01-29T10:39:49Z

AchimSchoene: New page: To send metadata please use the E= command. After the "E" parameter, you should see the song´s title. The command is extreamely key sensitive. The correct syntax is: <pre> http://<ip-in...

To send metadata please use the E= command. After the "E" parameter, you should see the song´s title. The command is extreamely key sensitive. The correct syntax is:

<pre>
http://<ip-instreamer>/rc.cgi?E=StreamTitle='Title';
</pre>

The Keyword: "StreamTitle" must be written as it is in the example. Please do not forget the " ' "signs and the " ; " at the end of the command.

The E= command work on Internet Radio mode. It could also sucessfully transfer the metadata through a Shoutcast server, when the Shoutcast Server work in the RELAY mode.

Shoutcast config:
RelayPort=8000
RelayServer=192.168.110.179 (Instreamer IP)

Instreamer Config:
Shoutcast Source : 0.0.0.0 : 8000