List of HW
BARIX Barionet family comparison matrix
Comparison of HW and SW features
| Barionet 1000 | Barionet 100 | Barionet 50 | |
|---|---|---|---|
| Device Type | Single Board Computer | Programmable controller | Programmable controller |
| Hardware: | |||
| CPU | MediaTek MT7620A (580 MHz) | Microchip PIC 16F877A | cFeon EN29LV160B |
| Memory | 64MB DRAM / 16MB Flash | 368 Bytes RAM / 14KB Flash | 16MB Flash |
| Network Interfaces: | |||
| Ethernet | 1 Port RJ45 Port 10/100 Mbps | 1 Port RJ45 10/100 Mbit | 1 Port RJ45 10/100 Mbit |
| RF | 1 Wi-Fi 802.11 b/g/n, 2.4 Ghz | -- | -- |
| USB interfaces | 2 USB host ports (2.0) | -- | -- |
| Serial Interface | 1 (DSub-9 male) RS-232 Serial Port | 1 RS-232 (DSub-9 male, RX/TX only) 1 RS-422/485 # (2/4 wire) |
1 RS-232 DSub-9 male, 5-wire RXD, TXD, RTS, CTS, GND 1 RS-485 on detachable screw terminal block as well as on 4 pin extension connectors, both with serial speeds from 300 bps to 230 kbps (asynchronous) |
| LED | 11 LED status indicators | 10 LED status indicators | 8 LED status indicators |
| I/O interfaces: | |||
| Relay | 2 relay outputs (max: 30VDC 5A) | 2 relay outputs (240 VAC 5 A) | 4 relay outputs (30 VDC, 0.5 A) |
| Output | 4 open collector (digital) outputs (4x24VDC, 0.3A) | 4 digital outputs (open collector, 24 V 0.1 A) | -- |
| Input | 8 contact closure Inputs (0-15VDC), of which 4 are 12 Bit analogue Inputs (0-15VDC) |
4 digital inputs (0-12 V), configurable pullups 4 universal inputs (analogue 0- 5/10 V or digital 0-12 V) with configurable pullups |
4 digital inputs (dry contacts) |
| 1 Wire Interface | 1-molex connector J3
(interface for external temperature sensors 18DS20 or other 1-Wire equipment) |
2 Barix extension bus connectors with Dallas 1-Wire capability |
1 Dallas 1-Wire interface |
| Power Supply Voltage | 9-30VDC, 2.5W max | 9-30 VDC, 4W max | 9-30 VDC, 4W max |
| Software: | |||
| Operating System | Linux OpenWrt Caos Calmer | Barix proprietary (BCL) | Barix proprietary (BCL) |
| Interpreter | Python 2.7 compiler (pre-installed) | BCL | BCL |
| Protocols | TCP/IP, DHCP, HTTP | TCP/IP, DHCP, HTTP, SNMP, Modbus/TCP, CGI | TCP/IP, DHCP, HTTP, SNMP, Modbus/TCP, CGI |
| Apps | https://wiki.openwrt.org/doc/howto/start | http://www.bcl-applications.info/ | http://www.bcl-applications.info/ |
| Board: | |||
| QINO | Lantronix Xport | Lantronix DSTni | |
| Availability: | |||
| Available | Available | Available |
More information available in our website: http://www.barix.com
Back to Main Page#Products
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"><html><head><META http-equiv="Content-Type" content="text/html; charset=utf-8"></head><body>
BARIX Barionet family Ð comparison matrix
|
|
BARIX Barionet1000 |
|
BARIX Barionet 100 |
BARIX Barionet 50 |
|
DEVICE TYPE |
Single Board Computer |
|
Programmable controller |
Programmable controller |
|
|
|
|
|
|
|
HARDWARE |
|
|
|
|
|
CPU |
MediaTek MT7620A (580 MHz) |
|
Microchip PIC 16F877A |
cFeon EN29LV160B |
|
Memory |
64MB DRAM / 16MB Flash |
|
368 Bytes RAM / 14KB Flash |
16MB Flash |
|
Network Interfaces: |
|
|
|
|
|
Ethernet |
1 Port RJ45 Port 10/100 Mbps |
|
1 Port RJ45 10/100 Mbit |
1 Port RJ45 10/100 Mbit |
|
RF |
1 Wi-Fi 802.11 b/g/n, 2.4 Ghz |
|
-- |
-- |
|
USB interfaces |
2 USB host ports (2.0) |
|
-- |
-- |
|
Serial Interface |
1 (DSub-9 male) RS-232 Serial Port |
|
1 RS-232 * (DSub-9 male, RX/TX only) 1 RS-422/485 * (2/4-wire) * 600..19Õ200 Baud, 7/8 bit, Odd/Even/No par |
1 (DSub-9 male, 5-wire RXD,
TXD, RTS, CTS, GND) RS-232 |
|
LED count |
11 LED status indicators |
|
10 LED status indicators |
8 LED status indicators |
|
I/O interfaces: |
|
|
|
|
|
Relay |
2 relay outputs (max: 30VDC 5A) |
|
2 relay outputs (240 VAC 5 A) |
4 relay outputs (30 VDC, 0.5 A) |
|
Output |
4 open collector (digital) outputs (4x24VDC, 0.3A) |
|
4 digital outputs (open collector, 24 V 0.1 A) |
|
|
Input |
8 contact closure Inputs (0-15VDC), of which 4 are 12 Bit analogue Inputs (0-15VDC) |
|
4 digital inputs (0-12 V),
configurable pullups |
4 digital inputs (dry contacts) |
|
1 Wire Interface |
1-molex connector J3 |
|
2 Barix extension bus connectors with Dallas 1-Wire capability |
1 Dallas 1-Wire interface |
|
Power Supply Voltage |
9-30VDC, 2.5W max |
|
9-30 VDC, 4W max |
9-30 VDC, 4W max |
|
|
|
|
|
|
|
SOFTWARE |
|
|
|
|
|
Operating System |
Linux OpenWrt Caos Calmer |
|
Barix proprietary (BCL) |
Barix proprietary (BCL) |
|
Interpreter |
Python 2.7 compiler (pre-installed) |
|
BCL |
BCL |
|
Protocols |
TCP/IP, DHCP, HTTP LuCI web interface |
|
TCP/IP, DHCP, HTTP SNMP, Modbus/TCP, CGI, HTTP web server |
TCP/IP, DHCP, HTTP SNMP, Modbus/TCP, CGI |
|
Apps |
Community: <a href="https://wiki.openwrt.org/doc/howto/start" target="_blank">https://wiki. Self-made: can be developed in
any language, for example: |
|
<a href="http://www.bcl-applications.info/" target="_blank">http://www.bcl-applications. |
<a href="http://www.bcl-applications.info/" target="_blank">http://www.bcl-applications. |
|
|
|
|
|
|
|
BOARD |
QINO |
|
Lantronix Xport |
Lantronix DSTni |
|
|
|
|
|
|
|
AVAILABILITY |
Available since 2017 |
|
Available |
Available |
</body></html>
