Exstreamer P5 and Infrared

Revision as of 09:48, 8 May 2017 by Elias (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Exstreamer P5 and Infrared

Concept

The Exstreamer P5 comes with a Control Port. To be able to use the Barix IR Remote Control Kit you need to make some HW changes.

Hardware

Following hardware is required to make this work:

  • Exstreamer P5
  • IR Remote Control Kit
  • RJ45 Cable

Hardware Changes

  1. Open the IR Remote Control Kit
  2. Take the RJ45 Cable and cut it in the required length
  3. Prepare the RJ45 Pin's 6,7 and 8
  4. Solder the the RJ45 to following ports on the IR board
  • J1-4 --> RJ45 8
  • J1-5 --> RJ45 7
  • J1-8 --> RJ45 6

Back to Main Page